Started By
Message

Old Toyota Tundra/sequoia, timing belt.

Posted on 12/5/18 at 10:31 pm
Posted by Ric Flair
Charlotte
Member since Oct 2005
13703 posts
Posted on 12/5/18 at 10:31 pm
The reliable car thread has me thinking. For first generation Tundras (2006 and below) and Sequoias (2007 and below), did you change the timing belt at the recommended intervals or not? They recommend every 80k Miles. I did it at 100k miles. Anyone push it further?
Posted by Torrence Hatch
Member since Nov 2018
664 posts
Posted on 12/5/18 at 10:41 pm to
I don't know, but I think the LS430 interval is 90K, so I wouldn't push it past that. Timing belts are stupid, and not something I would try to get the maximum lifespan out of.
Posted by bhtigerfan
Baton Rouge
Member since Sep 2008
29827 posts
Posted on 12/5/18 at 10:43 pm to
I had a Sequoia that I bought at auction that had 202,000 miles on it. If they change the timing belt and water pump, they usually put a sticker on the timing belt cover. This Sequoia didn't have a sticker. I called Lake Charles Toyota (from the title, previous owner was from there) and gave them the VIN# to see if it had been changed. They had done all of the maintenance on it and had never changed it. I found the previous owners home number and called him to see if he had it done at an independent mechanic. Nope. 202,000 miles on original timing belt and water pump.
This post was edited on 12/5/18 at 10:45 pm
Posted by AndyCBR
Baton Rouge, LA
Member since Nov 2012
7575 posts
Posted on 12/5/18 at 10:46 pm to
It depends on the engine. The 4.7 is an interference engine so a timing belt failure can be very costly.

For an interference engine I wouldn't chance it. Non-interference, maybe roll the dice.
Posted by HotBoudin
Metry
Member since Sep 2003
887 posts
Posted on 12/5/18 at 11:18 pm to
Had the the belt/pump changed on my '03 Sequoia at 130k (bought it new in '02). The water pump was about to go bad. That would have been the first breakdown.
Posted by coolneal
Lakeland, TN
Member since Nov 2007
637 posts
Posted on 12/6/18 at 2:31 am to
I had a 2003 Tundra.. changed at $188k.
Posted by Rougaroux
Madisonville
Member since Feb 2017
723 posts
Posted on 12/6/18 at 3:42 am to
Mine made it to200k before popping.
Posted by farad
Member since Dec 2013
9871 posts
Posted on 12/6/18 at 4:04 am to
2006 here...did it at 110k...figured with my luck that was pushing it far enought...
Posted by Bonnie Blue
Nashville
Member since Apr 2011
183 posts
Posted on 12/6/18 at 5:01 am to
I had my first one changed at 160,000. I had the mechanic save it for me to look at. It still looked like it was in good shape. the truck hass about 200,000 on it now. I will never change it again.
This post was edited on 12/6/18 at 5:02 am
Posted by Hammertime
Will trade dowsing rod for titties
Member since Jan 2012
43030 posts
Posted on 12/6/18 at 6:59 am to
Did my gf's GX 470 at 116k when we bought it. It had actually been done before, but there wasn't a sticker, and I couldn't tell that it had been done from a quick inspection
quote:

I'm not a mechanic, but this goes against everything I've ever seen and makes 0 sense. Most manuals say to inspect for visual signs of wear, replace when needed
You can't get to the timing belt without taking the entire front of the engine off. Well, I guess you can make it so far as to take the three cover plates off, but you won't be able to see the inside of the belt, and you'll already be 1/2 of the way done the teardown by then. There is no way to properly inspect the belt and tensioner without taking everything completely apart.

I've done a four, and they've all looked good. IMHO, the tensioner would be the problem. Loose tensioner, and you get slack in the belt that causes it to jump and pop. Leaking water pump is also a good opportunity to change it out.

This isn't an external belt like the one you can see. This is internal, and controls the camshafts. By reading reports, they pop without notice when someone gets on the gas, and then lets off of it abruptly. Manufacturers use belts because they are more quiet than chains
This post was edited on 12/6/18 at 7:14 am
Posted by EveryoneGetsATrophy
Member since Nov 2017
2907 posts
Posted on 12/6/18 at 7:18 am to
I brought my 2005 4.7 Tundra to the dealership at 80k miles and the service writer told me to bring it in at 120k, don't waste my money. Change the water pump out too since you have to remove it to get to the belt.
Posted by trident
Member since Jul 2007
4765 posts
Posted on 12/6/18 at 7:30 am to
Can we discuss timing chains in this thread? I have a 2012 highlander with 125,000 miles on it and it has a chain. Do I need to do anything? It seems like the chain is "don't fix until broken" unlike the belt. TIA
Posted by jimbeam
University of LSU
Member since Oct 2011
75703 posts
Posted on 12/6/18 at 7:30 am to
So glad mine has a timing chain
Posted by FreeDevin40
Tiger Stadium
Member since Oct 2018
138 posts
Posted on 12/6/18 at 7:57 am to
Generally the Water pump leaks and needs to be changed first, gotta remove the T-belt to do the pump so might as well change it while it's off.

Posted by Them
People's Republic of Bozeman
Member since Nov 2008
11140 posts
Posted on 12/6/18 at 8:14 am to
You people crack me up. You love how reliable the 4.7 is but you won’t spend $800 every 8-10 years to change the one thing that keeps it so dead reliable.
Posted by mikelbr
Baton Rouge
Member since Apr 2008
47572 posts
Posted on 12/6/18 at 8:23 am to
quote:

The reliable car thread has me thinking. For first generation Tundras (2006 and below) and Sequoias (2007 and below), did you change the timing belt at the recommended intervals or not? They recommend every 80k Miles. I did it at 100k miles. Anyone push it further?


I had a 2005 Sequoia I didn't change the timing belt and traded it in at 155k miles running perfectly fine.


Complete waste of money to do that shite at the interval.
This post was edited on 12/6/18 at 8:24 am
Posted by PortHudsonPlaya
Houston
Member since Jul 2017
3170 posts
Posted on 12/6/18 at 8:35 am to
I have an ‘04 Tundra. Did it at 100,000 and recently at 200,000.
Posted by Flashback
reading the chicken bones
Member since Apr 2008
8354 posts
Posted on 12/6/18 at 11:07 am to
I do a lot of driving and only buy non interference cars with timing chains. I absolutely do not see the point of a timing belt in place of chain, especially with an interference motor.
Posted by Flair Chops
to the west, my soul is bound
Member since Nov 2010
35575 posts
Posted on 12/6/18 at 7:42 pm to
I've got a 2006 tundra with 206k and haven't changed a belt
Posted by Golfer
Member since Nov 2005
75052 posts
Posted on 12/6/18 at 8:00 pm to
‘06 Tundra here.

Changed at 125k

Will do again at 250k
first pageprev pagePage 1 of 2Next pagelast page

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram