- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Homebrewing Thread: Volume II
Posted on 4/26/16 at 11:48 am to Tiger Ryno
Posted on 4/26/16 at 11:48 am to Tiger Ryno
quote:
Anyone here go straight to all grain brewing and skip past extract all together?
Not I.
Don't know what my next beer is going to be... probably will get something brewing this weekend at some point though.
0
Posted on 4/26/16 at 11:59 am to Tiger Ryno
quote:
Anyone here go straight to all grain brewing and skip past extract all together?
Nope, I brewed two extract batches before switching to all grain.
Posted on 4/26/16 at 12:10 pm to Tiger Ryno
I did 1 extract and switched but had a little bit of experience with the process before I actually started homebrewing. Extract is not a bad thing to get started with, however
Posted on 4/26/16 at 12:10 pm to Tiger Ryno
I did. Years later I use a good bit of extract to make up for efficiency woes and to brew 10 gallon batches that won't fit in my mash tun.
Posted on 4/26/16 at 12:21 pm to Tiger Ryno
quote:
go straight to all grain brewing and skip past extract
not me, and if I had it to do all over, I would start with extract again.
do any of you have advice on how much ginger to use in a beer?
This post was edited on 4/26/16 at 12:24 pm
Posted on 4/26/16 at 1:25 pm to LoneStarTiger
quote:
do any of you have advice on how much ginger to use in a beer?
None.
You're welcome.
Posted on 4/26/16 at 1:45 pm to LoneStarTiger
I brewed a ginger saison a month ago and used .75 oz of fresh minced ginger at 5 minutes. Perfect amount for what I was going with. It's similar ginger levels to a good ginger ale.
Posted on 4/26/16 at 1:50 pm to BottomlandBrew
quote:
None. You're welcome.
quote:
I brewed a ginger saison a month ago and used .75 oz of fresh minced ginger at 5 minutes. Perfect amount for what I was going with. It's similar ginger levels to a good ginger ale.
Perfect, thanks!
Posted on 4/26/16 at 2:11 pm to BMoney
quote:
do any of you have advice on how much ginger to use in a beer?
None.
Can we add this to the FAQ in the first post?
Posted on 4/26/16 at 2:13 pm to LSUGrad00
You people are crazy. Ginger is great!
Ginger is great!
Posted on 4/26/16 at 3:34 pm to Tiger Ryno
quote:
Anyone here go straight to all grain brewing and skip past extract all together?
No. I did about 7 batches (2 were dumps) before i went all grain. I will say. When buying equipment, buy your brewpot with the plan to go all grain, so aim for a 10 gallon brewpot.
Posted on 4/27/16 at 8:12 am to BugAC
quote:
When buying equipment, buy your brewpot with the plan to go all grain, so aim for a 10 gallon brewpot.
This is good advice...
When I first started I purchased a 6G brew pot because the extract recipes were 3G boils. After the first two batches I had to turn around and buy a large pot for full boils.
Posted on 4/27/16 at 9:15 am to BugAC
15 gallon pot. 10 gallon is good for nothing but 5 gallon batches. With the 15 gallon pot you can do 5 gallons or the occasional 10 for not much difference in cost.
Posted on 4/29/16 at 7:22 am to LSUGrad00
So i'll be doing my first testing of my sour i brewed about 7 weeks ago. Will be testing ph, gravity, and taste to see what is going on with it. Whenever i first pitched everything i got a good head of krausen. Curious to see how the beer is coming along.
Posted on 4/29/16 at 7:55 am to LSUGrad00
Also, an equipment question.
I have this setup on my kegerator system
I will be looking to add a 3rd keg to my fridge, thus i need either a 3rd regulator or one of these
How do i connect either a 3rd regulator or this air distributor to my already existing 2 tap regulator system? Is there additional hardware i need to purchase?
When it comes time to buy, i'll probably just call up keg connections, just wondering if anyone has experience adding a line to their keg system.
I have this setup on my kegerator system
I will be looking to add a 3rd keg to my fridge, thus i need either a 3rd regulator or one of these
How do i connect either a 3rd regulator or this air distributor to my already existing 2 tap regulator system? Is there additional hardware i need to purchase?
When it comes time to buy, i'll probably just call up keg connections, just wondering if anyone has experience adding a line to their keg system.
Posted on 4/29/16 at 8:06 am to BugAC
The cheap way is to plug something like this into one of the secondary regulators..
The more expensive way would be to purchase a single secondary regulator and add it to the end of your existing bank of secondary regulators.
ETA: When I expanded; I added a manifold like is pictured above.
I have the manifold attached to one of the secondary regulators and all of my serving kegs are
attached to it.
The second regulator I use for force carbonation, bottling, CO2 purge, and a few other things.
The more expensive way would be to purchase a single secondary regulator and add it to the end of your existing bank of secondary regulators.
ETA: When I expanded; I added a manifold like is pictured above.
I have the manifold attached to one of the secondary regulators and all of my serving kegs are
attached to it.
The second regulator I use for force carbonation, bottling, CO2 purge, and a few other things.
This post was edited on 4/29/16 at 8:09 am
Posted on 4/29/16 at 8:28 am to LSUGrad00
I'm more wondering about installation. Do i need to take the barb off the regulators to add a 3rd regualator or an air distributor?
Also, i'm liking the idea of using the distributor. I can carbonate to whatever level i want with one regulator, then set the other regulator with the distributor to a standard carb level or to serving pressure.
Also, i'm liking the idea of using the distributor. I can carbonate to whatever level i want with one regulator, then set the other regulator with the distributor to a standard carb level or to serving pressure.
This post was edited on 4/29/16 at 8:30 am
Posted on 4/29/16 at 8:54 am to BugAC
quote:
I'm more wondering about installation. Do i need to take the barb off the regulators to add a 3rd regualator or an air distributor?
If you are using a gas manifold like in the picture I attached you just run a length of gas tubing from the bottom of one of your regulators to the barb on the side of the gas manifold.
If you are adding a third secondary regulator, you will need the new secondary regulator and a nipple. Remove the plug nut from the end of your secondary bank, add nipple, add new regulator, add plug nut to the opposite side of new regulator.
Nipple
Plug Nut
Posted on 4/29/16 at 9:01 am to BugAC
quote:
'm more wondering about installation. Do i need to take the barb off the regulators to add a 3rd regualator or an air distributor?
If you are going to add a new regulator onto your 2 regulator system there should be a nut on the end of your regulator currently that will come out (maybe with some force). and then you can buy a middle piece to connect the new regulator to your current bank.
Posted on 4/29/16 at 9:10 am to BugAC
Unless you're planning on serving beers at three different pressures or carbonating multiple kegs while you also have some set up to serve, why add another regulator? Would probably be much cheaper to just connect one of your current ones to a 2-port manifold, and then you can use those two lines to serve beer and if you need to carbonate you can use your stand-alone regulator/line for that purpose.
I do all my serving/carbonating with a single regulator and a 4-port manifold, just close off the valves to already carbonated kegs and bump up the pressure, then drop it back down to serve. Admittedly I do have a backup CO2 tank & regulator so if I really needed to separate pressures I could.
I do all my serving/carbonating with a single regulator and a 4-port manifold, just close off the valves to already carbonated kegs and bump up the pressure, then drop it back down to serve. Admittedly I do have a backup CO2 tank & regulator so if I really needed to separate pressures I could.
Page 2 of 277
Popular
Back to top
Follow TigerDroppings for LSU Football News