- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Mounting a TV to brick: into brick or mortar?? UPDATED with pics in OP
Posted on 6/22/14 at 4:30 pm
Posted on 6/22/14 at 4:30 pm
I was going to let the best buy guys come out an do it but it ends up being $350. Screw that!
It seems that anchoring into the mortar would be easier to patch in the future in case we took it down for whatever reason. I've read mixed things which probably means both would work fine. Does anyone have experience with this?
Eta : this is where it's going. Probably going with a 50inch.
ETA:
Put it up yesterday. Bought a dewalt 8 amp rotary corded drill ($60). Drilled into brick. Basic masonary drill bits dulled quickly and I would recommend the higher quality ones that work with both rotary and hammer drills. I probably spent around $40 on bits. I used a sanus mount that was $90 at best buy. Took about 4 hrs including 2 trips to Home Depot. It could easily be done under an hour if you have everything you need. Even with buying a new drill I came out ahead vs paying best buy $350. It's a samsung 50 in btw.
It seems that anchoring into the mortar would be easier to patch in the future in case we took it down for whatever reason. I've read mixed things which probably means both would work fine. Does anyone have experience with this?
Eta : this is where it's going. Probably going with a 50inch.
ETA:
Put it up yesterday. Bought a dewalt 8 amp rotary corded drill ($60). Drilled into brick. Basic masonary drill bits dulled quickly and I would recommend the higher quality ones that work with both rotary and hammer drills. I probably spent around $40 on bits. I used a sanus mount that was $90 at best buy. Took about 4 hrs including 2 trips to Home Depot. It could easily be done under an hour if you have everything you need. Even with buying a new drill I came out ahead vs paying best buy $350. It's a samsung 50 in btw.
This post was edited on 6/29/14 at 8:48 am
Posted on 6/22/14 at 4:35 pm to Coater
downside to both. Get a really good bit to drill with and I would think you don't want to use a hammer drill on it.
Mortar rots over time but not fast enough to worry about with amounted tv. It is easy to patch if/when you remove the tv and mount from the wall.
Brick tends to crack and crumble easy but is more consistent than mortar is.
Mortar rots over time but not fast enough to worry about with amounted tv. It is easy to patch if/when you remove the tv and mount from the wall.
Brick tends to crack and crumble easy but is more consistent than mortar is.
Posted on 6/22/14 at 4:36 pm to Coater
Into brick, always into brick.
The motor is weak.
(ETA) not an expert but years ago I worked for a Diebold subcontractor and when we installed security cameras and such it was always into brick.
We also used hammer drills.
The motor is weak.
(ETA) not an expert but years ago I worked for a Diebold subcontractor and when we installed security cameras and such it was always into brick.
We also used hammer drills.
This post was edited on 6/22/14 at 4:38 pm
Posted on 6/22/14 at 5:54 pm to ForeLSU
Just drill a hole where you need it, be it in mortar or brick and use a wide expanding toggle screw anchor.
Posted on 6/22/14 at 7:49 pm to 4WHLN
Into brick. I have a thread on the OB. I'll see if I can find it.
LINK
Rent or buy a Hammerdrill and a masonry bit. Use anchor sleeves that expand. Tapcons sucked. The brick is usually a veneer and hollow inside. The mortar is brittle and should only be used for decorative hangings.
LINK
Rent or buy a Hammerdrill and a masonry bit. Use anchor sleeves that expand. Tapcons sucked. The brick is usually a veneer and hollow inside. The mortar is brittle and should only be used for decorative hangings.
This post was edited on 6/22/14 at 7:54 pm
Posted on 6/22/14 at 8:33 pm to Hu_Flung_Pu
quote:
Rent or buy a Hammerdrill and a masonry bit. Use anchor sleeves that expand. Tapcons sucked. The brick is usually a veneer and hollow inside. The mortar is brittle and should only be used for decorative hangings.
This. Except I've had good luck with tapcons into brick. Anything into mortar will eventually fail.
Posted on 6/22/14 at 9:43 pm to Coater
If you pole mount from the ceiling you can run your cables through the pole.
Posted on 6/22/14 at 10:43 pm to HubbaBubba
Brick use tapcon screws
Posted on 6/23/14 at 5:31 am to HubbaBubba
quote:
If you pole mount from the ceiling you can run your cables through the pole.
That was my first thought too. The wood ceiling looks solid enough to support it. LINK
Posted on 6/23/14 at 6:20 am to Layabout
The pole mount would be a good option. Mount the bracket to a stud in the attic and cut a hole in the ceiling and drop the pole thru.
Nice clean install.
Nice clean install.
Posted on 6/23/14 at 7:12 am to 4WHLN
Brick. These days a 50" led TV is super lightweight. That's exactly what I have mounted.
Posted on 6/23/14 at 11:55 am to CAD703X
Pole mounted is definitely an option. Wife just didn't like it.
Posted on 6/23/14 at 12:05 pm to Hu_Flung_Pu
Your wife not liking pole mounting is your problem, not mine.
Posted on 6/23/14 at 12:31 pm to VABuckeye
i used the late great ikea $10 mount RIP
Posted on 6/23/14 at 1:21 pm to VABuckeye
quote:
Your wife not liking pole mounting is your problem, not mine.
I laughed out loud.
Posted on 6/23/14 at 8:35 pm to Hu_Flung_Pu
Just a nice masonry bit will work. Into the brick. I drilled some half inch holes in solid cinder blocks and hung several hundred pounds of clothing and stacked storage boxes in my garage. The weight of a flat screen will be fine with a couple of expanding bolts. I think they're called anchor bolts. Mine had grooves around them and the bolt made I expand and bite into the concrete.
Posted on 6/24/14 at 8:41 am to TU Rob
quote:
Just a nice masonry bit will work. Into the brick. I drilled some half inch holes in solid cinder blocks and hung several hundred pounds of clothing and stacked storage boxes in my garage. The weight of a flat screen will be fine with a couple of expanding bolts. I think they're called anchor bolts. Mine had grooves around them and the bolt made I expand and bite into the concrete.
this is likely what i'm going to do. if i didn't have everything already wired behind the tv i'd consider the ceiling mount. looks like it will be a project for this weekend.
thanks for all the responses
Popular
Back to top
Follow TigerDroppings for LSU Football News