- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Building my first PC - Technical Issue UPDATE page 2
Posted on 1/26/13 at 7:27 pm to VABuckeye
Posted on 1/26/13 at 7:27 pm to VABuckeye
Charleaux came by this afternoon. Here's what we did:
I put his mobo/cpu, RAM, vid card, and PSU in his case. Connected everything, except I noticed that the PSU only had one 6-pin PCIe connector. In his initial build, he only plugged in the one connector to his XFX 7850 and left the other one alone. This was the one and only problem.
But, I'm stupid, and did not realize that the DVI connection to my spare monitor was loose and not completely screwed in. So we wasted a good bit of time swapping parts and trying to figure out why in the hell nothing would produce video. Wasn't until my own computer wouldn't display video that I actually had the bright idea to check the damn connection.
The PSU works fine, but it's a pretty cheap unstable PSU with really only 450w continuous output, and the 4-pin atx cable is too short. It's a PSU better suited for a low-end microATX build and not a gaming computer. So instead of getting extension cables and a 6-pin adapter and praying the Coolmax can handle the load when he starts gaming later, I sold him a spare raidmax hybrid 630w from a PC I'm parting out, built entire system, did some minor cable management (the raidmax is modular), then we installed windows and all drivers. He left with a complete system, ready to start gaming.
I put his mobo/cpu, RAM, vid card, and PSU in his case. Connected everything, except I noticed that the PSU only had one 6-pin PCIe connector. In his initial build, he only plugged in the one connector to his XFX 7850 and left the other one alone. This was the one and only problem.
But, I'm stupid, and did not realize that the DVI connection to my spare monitor was loose and not completely screwed in. So we wasted a good bit of time swapping parts and trying to figure out why in the hell nothing would produce video. Wasn't until my own computer wouldn't display video that I actually had the bright idea to check the damn connection.
The PSU works fine, but it's a pretty cheap unstable PSU with really only 450w continuous output, and the 4-pin atx cable is too short. It's a PSU better suited for a low-end microATX build and not a gaming computer. So instead of getting extension cables and a 6-pin adapter and praying the Coolmax can handle the load when he starts gaming later, I sold him a spare raidmax hybrid 630w from a PC I'm parting out, built entire system, did some minor cable management (the raidmax is modular), then we installed windows and all drivers. He left with a complete system, ready to start gaming.
This post was edited on 1/26/13 at 7:31 pm
Posted on 1/26/13 at 8:39 pm to ILikeLSUToo
damn strong work my friend
Posted on 1/26/13 at 9:11 pm to ILikeLSUToo
quote:
Connected everything, except I noticed that the PSU only had one 6-pin PCIe connector. In his initial build, he only plugged in the one connector to his XFX 7850 and left the other one alone. This was the one and only problem.
It's almost always something simple.
Posted on 1/26/13 at 10:23 pm to ILikeLSUToo
First post from the new build!
Since this was my first build and never looked at a graphics card before, I had no idea that both 6-pin connectors had to be used. I am glad I wasn't completely retarded in what I had accomplished.
Major props to ILikeLSUToo for taking the time to help me out! If other newbies like me need help, he's the man!
Since this was my first build and never looked at a graphics card before, I had no idea that both 6-pin connectors had to be used. I am glad I wasn't completely retarded in what I had accomplished.
Major props to ILikeLSUToo for taking the time to help me out! If other newbies like me need help, he's the man!
Popular
Back to top
Follow TigerDroppings for LSU Football News