- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Custom Rod Holders
Posted on 2/13/14 at 8:57 pm
Posted on 2/13/14 at 8:57 pm
Didn't see a thread on this so I figured I would make one.
Top section is 6' 2"x1". I found 36" bendable rubber coated twist ties at Lowes and cut into 6" sections for the "holders". I twisted one end of the "holder" around a screw using needlenose pliars and secured it with a washer. Holders are 8" apart.
Bottom is 6' 2"x4" with 1 1\2" holes cut into the board using a wood bit. Holes are 8" apart.
Top section is 6' 2"x1". I found 36" bendable rubber coated twist ties at Lowes and cut into 6" sections for the "holders". I twisted one end of the "holder" around a screw using needlenose pliars and secured it with a washer. Holders are 8" apart.
Bottom is 6' 2"x4" with 1 1\2" holes cut into the board using a wood bit. Holes are 8" apart.
This post was edited on 2/13/14 at 10:31 pm
8
Posted on 2/13/14 at 9:08 pm to pakowitz
Are those holders bendable?
Posted on 2/13/14 at 9:19 pm to pakowitz
How's about some details?
Posted on 2/13/14 at 9:21 pm to pakowitz
I'll try and post mine tomorrow
Posted on 2/13/14 at 9:27 pm to HeadBusta4LSU
I need about 5 times that many.
Posted on 2/13/14 at 9:29 pm to pakowitz
Rize has some nice ones
Posted on 2/13/14 at 9:30 pm to pakowitz
I wish someone would design one for the back of my truck
Posted on 2/13/14 at 9:33 pm to Redfish2010
quote:
for the back of my truck
thats been discussed on the ob before. lots of good ideas.
Posted on 2/13/14 at 10:26 pm to Redfish2010
quote:
I wish someone would design one for the back of my truck
I've seen some nice ones on Google images when I was looking for ideas for the one I just built. Just search for custom rod holders for truck.
This post was edited on 2/13/14 at 10:27 pm
Posted on 2/13/14 at 10:29 pm to mack the knife
Yes I've seen a few. Too damn lazy to build one
Posted on 2/13/14 at 10:40 pm to pakowitz
I plan on making some of these for my pegboard. They sell them, but it's about $3-4 per
Posted on 2/20/14 at 2:46 pm to xenon16
Anyone else have any pictures they would like to share of their homemade rod holders?
Posted on 2/20/14 at 3:04 pm to pakowitz
I like but I'd install some sort of door stop
Posted on 2/20/14 at 3:11 pm to pakowitz
I have a nice one my wife bought me. It holds 6 rods. It's in the corner of my garage, right next to about 30 rods piled up in a corner.
Posted on 2/20/14 at 4:30 pm to pakowitz
Here's the ones I made for the back of my old truck, haven't tried them in the new one so probably will have to alter. on the back side of that 2X6 is some pvc angled at about 60 degrees.
Here is one I made for my garage ceiling.
Here is one I made for my garage ceiling.
Posted on 2/22/14 at 1:13 pm to VanRIch
Inspired by this thread.
Posted on 2/22/14 at 1:17 pm to Motorboat
Looks good brah
Posted on 2/22/14 at 1:27 pm to Trout Bandit
Notice the rods to the back? Whenever you want we will
Hit the snappas
Hit the snappas
Posted on 2/22/14 at 1:59 pm to VanRIch
I really want a ceiling mount like that but I have 9' ceilings and I'm short :|
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News