MrBobDobalina

re: Dangerous home shop tools

Posted by MrBobDobalina on 3/23/24 at 6:41 pm

Turn it in reverse when you're about to pop through. Ya welcome ...

re: P trap help - how would you repair?

Posted by MrBobDobalina on 3/21/24 at 11:18 am

Close but we want dwv as the fittings don't need to be pressure rated. Sch 40 takes up more room that you do not have. [link=(https://www.homedepot.com/p/Charlotte-Pipe-2-in-PVC-DWV-Coupling-PVC001001000HD/203390796)]coupling[/link] Edited bushing link [link=(https://www.homedepot.com/p/...

re: P trap help - how would you repair?

Posted by MrBobDobalina on 3/21/24 at 10:55 am

If you have a hacksaw or sawzall, use it to remove ftg "A" by cutting through pipe "B" and leave as much of pipe "B" intact as possible. You want to get rid of that 90° while leaving as much of pipe "B" as you can. The side of your blade should be touching "A" while you are cutting through "B"....

re: P trap help - how would you repair?

Posted by MrBobDobalina on 3/21/24 at 10:05 am

Some states like NY and CA require 2" traps in kitchens, LA does not. Those states circumvent glue joints by using galvanized or cast iron fittings for drainage. Glue joints are much less forgiving as once they dry (obviously) you're stuck with what you have. SJ you can loosen and retighten forever....

re: P trap help - how would you repair?

Posted by MrBobDobalina on 3/21/24 at 10:00 am

I'll give them props for properly venting your island (chicago/loop vent) and not just throwing a studor vent under there. If you want to avoid cutting in a tee or using the socket saver there is another option if you have the space. For the record, nickel and dime repair (teflon/pipe dope) m...

re: P trap help - how would you repair?

Posted by MrBobDobalina on 3/21/24 at 9:25 am

The OG plumber that installed this is who fricked you from the jump. Normally in houses the only thing that needs a 2" drain is a washing machine. If I was coming fix this at your house...I'm either A.) Cutting out that Tee and replacing it with a 2x1-1/2" tee or B.) Using a socket saver to rem...

re: Zeppelin Album

Posted by MrBobDobalina on 3/19/24 at 3:21 pm

No he's saying his version of the album does not have the specific song, "Over the Hills and far away" on it. I just did 10 minutes of google/Wikipedia and can't find any version of that album released anywhere at anytime that removed "over the hills..." ...

re: Calling plumbers of TD

Posted by MrBobDobalina on 3/15/24 at 9:17 am

^^^ Correct. The tee is 3/8 compression, the faucet will be 1/2 Female iron pipe. Additionally, you can buy a couple of 3/8 comp x 3/8 comp lavatory flexs and daisy cahin them with a 3/8 compression union: [link=(https://www.supplyhouse.com/Bluefin-BCU038-3-8-OD-Brass-Compression-Union-Lead-Free?utm...

re: Used Vehicle Pricing

Posted by MrBobDobalina on 3/14/24 at 11:30 am

In 2019, I bought a 2017 Tacoma for 30.5k. It had 29k miles and was loaded (4wd, manual, TRD Offroad) I wasn't able to negotiate it down very much as there were less than 10 for sale in the US and the closest one was Mobile. All that to say, if it has less than 35k miles and isn't a base mode...

re: Natural Gas Crawfish Burner - Info and Build

Posted by MrBobDobalina on 3/8/24 at 12:31 pm

No regulator needed if you're on a regular gas line. If you had a high pressure regulator installed (for a home generator) then you would likely have to regulate it down at the burner for it to work properly. ...

re: Anyone have a natural gas crawfish burner

Posted by MrBobDobalina on 3/7/24 at 7:27 am

[link=(https://www.tigerdroppings.com/rant/display.aspx?sp=107793036&s=2&p=107793036#107793036)]TD Thread[/link]...

Outdoor Board

re: Facebook and Instagram down

Posted by MrBobDobalina on 3/5/24 at 9:36 am

RUSKIES FINALLY GOT US...

re: Forgotten Gems of Jimi Hendrix

Posted by MrBobDobalina on 3/1/24 at 8:38 pm

You seem to have stumbled deeper than most into the deep cuts. No one's mentioned my personal favorite song of his, [link=(https://youtu.be/C3yGDKDc9ZU?si=oHyoguig6sMHCq2S)]Somewhere[/link] Off the album Crash Landing. This version is lower quality but it is the only example on YouTube fro...

re: Opinion on Ballistol...

Posted by MrBobDobalina on 3/1/24 at 6:13 pm

All I’ve used the past 3 years. Don’t need much and anything it touches will hold the smell. I used it on a pair of leather work boots and while it did condition them, I wouldn’t do it again strictly bc of the smell. ...

Outdoor Board

re: Bought a new car over the weekend, WYDI

Posted by MrBobDobalina on 2/19/24 at 10:09 pm

[quote]new car[/quote]...

re: Late to the party: Stuff (band)

Posted by MrBobDobalina on 2/16/24 at 8:55 am

Youtube had the full set of them at Montreaux Jazz festival 1976 up for a few years but pulled it about 2 years ago. I was probably 500 of the 250,000 or so views it had. One of the grooviest bands I was ever shown, Richard Tee to me looked like the Andre 3000 of his time(RIP). Daily motion has a co...

re: motorcycle exhaust install

Posted by MrBobDobalina on 2/12/24 at 11:16 am

I don't think Mike's services anything besides KTM. Worth a phone call though. Rad cycles on Nicholson would definitely be able to help if Mike's falls through. ...

Outdoor Board