Remington 700 misfire issues | TigerDroppings.com

Posted byMessage
Thib-a-doe Tiger
LSU Fan
Member since Nov 2012
13882 posts
 Online 

Remington 700 misfire issues



I have been having my 700 30-06 for roughly 17 years now. Have pumped hundreds, if not thousands of rounds through it. This year, I was about to shoot a doe, pulled trigger, and nothing happened. Figured I left the safety on, checked and it was off. I had seen the shows about the people killed with misfires, so I kept it on the deer and pushed the safety forward as hard as I could, nothing. Decided to try the trigger again, and as soon as my finger touched the trigger the gun went off. I have never messed with the pull weight so it is set at the factory 7-7 1/2 lbs. No way the pressure I put on it could have made the gun go off. Anyone else ever have this issue?

Sidenote: I kept the crosshairs on her ribs and actually killed the deer, but won't take credit for it







Back to top
Share:
KingRanch
LSU Fan
The Ranch
Member since Mar 2012
57293 posts

re: Remington 700 misfire issues


Feliciana had the same issue





Back to top
Teyeger
LSU Fan
Smoke Grove
Member since Sep 2011
2369 posts

re: Remington 700 misfire issues


May need a really good cleaning. May be a weak spring. I would definitely take it to a gunsmith during the off season and have that sucker worked on.





Back to top
  Replies (0)
ChadJones4Heisman
New Orleans Saints Fan
Baton Rouge
Member since Jan 2008
1365 posts

re: Remington 700 misfire issues


Fuuuuck that!! I will never own a 700 after reading and hearing so much ab this issue





Back to top
mylsuhat
New Orleans Saints Fan
NOLA
Member since Mar 2008
39437 posts

re: Remington 700 misfire issues


My dad's Model 700 30-06 is a little older than yours and he has had no problems. Mine is 10 years old and no problems either.

Have you looked into it? Maybe some buildup on the trigger?


ETA: I absolutely LOVE the Remington 700



This post was edited on 3/20 at 4:51 pm


Back to top
  Replies (0)
Thib-a-doe Tiger
LSU Fan
Member since Nov 2012
13882 posts
 Online 

re: Remington 700 misfire issues


I contacted the best gunsmith around and he said he will change out the entire firing mech. I am terrified of the gun as of now and bowhunted the rest of the year, which was fine with me.





Back to top
Thib-a-doe Tiger
LSU Fan
Member since Nov 2012
13882 posts
 Online 

re: Remington 700 misfire issues


The gun has been cleaned several times (won't say religiously) but I am hoping that's what it was. would be a lot less scary. I know lots of people with 700's that have never had a problem, but after looking into it some guns do it once and never again.





Back to top
  Replies (0)
CBDTigerFan
Northwestern St. Fan
Member since Mar 2009
2214 posts

re: Remington 700 misfire issues


Never had problem,
After you shot did you look for a problem?
Was the bolt all the way down?
Did you dry fire it after to see if the problem was still there?






Back to top
Teyeger
LSU Fan
Smoke Grove
Member since Sep 2011
2369 posts

re: Remington 700 misfire issues


quote:

I contacted the best gunsmith around and he said he will change out the entire firing mech


He will prolly just completely clean the bolt and the trigger. Get you a new after market trigger, like a Timney, having a really good trigger will also make you a much better shot.






Back to top
  Replies (0)
Thib-a-doe Tiger
LSU Fan
Member since Nov 2012
13882 posts
 Online 

re: Remington 700 misfire issues


quote:

After you shot did you look for a problem


Everything seemed to be in order

quote:

Was the bolt all the way down


Yep

Did you dry fire it after to see if the problem was still there

Dry fired like a champ






Back to top
Thib-a-doe Tiger
LSU Fan
Member since Nov 2012
13882 posts
 Online 

re: Remington 700 misfire issues


quote:

Timney


That's what I found. I will let him look at it and if he decides to change it that's what I'll get






Back to top
  Replies (0)
CBDTigerFan
Northwestern St. Fan
Member since Mar 2009
2214 posts

re: Remington 700 misfire issues


quote:

Did you dry fire it after to see if the problem was still there

Dry fired like a champ

Sounds like something got in the trigger mechanism not allowing it to fully release.






Back to top
  Replies (0)
hypnos
Texas Fan
Member since Dec 2009
2224 posts

re: Remington 700 misfire issues


Might have just been a defective cartridge, ive had one of those and my 700 is only about six years old. But to be safe id replace your trigger, you can get a Timney for about $200, and have a smith crack your bolt open and check it for excessive wear and tear.

While you are at it. If hes going to crack your bolt have him square it with the receiver and pillar bed your stock that should take your rifle to sub moa.



This post was edited on 3/20 at 5:05 pm


Back to top
  Replies (0)
FelicianaTigerfan
LSU Fan
Baton Rouge
Member since Aug 2009
15235 posts

re: Remington 700 misfire issues


I had the exact same issue.(Felt likr safety was on but it wasn't and trigger wouldn't pull. Put safety back on and gun fired) Brought it home, cleaned it and shot 5 perfects shots. Had an 8pt later in the season and trigger wouldn't pull so I kept cross hairs on it and tried the bolt and safety. Once the trigger did pull I went through 4 bullets all failing to go off when the pin hit soft. Got home and it shot fine.

My dad brought it to a gunsmith and had everything changed out



This post was edited on 3/20 at 5:07 pm


Back to top
  Replies (0)
kengel2
LSU Fan
Team Gun
Member since Mar 2004
5765 posts
 Online 

re: Remington 700 misfire issues


quote:

Fuuuuck that!! I will never own a 700 after reading and hearing so much ab this issue


What issue? Its a 17 year old gun. Some items require maintenance. On a 17 year old gun, $150 for a trigger seems like good investment.






Back to top
homesicktiger
LSU Fan
High altitude hell
Member since Oct 2004
274 posts

re: Remington 700 misfire issues


Isn't there some year of production that marked a design change impacting this issue? Or am I thinking of a different gun? I never researched the claims, but I've heard that some are dubious and go back to poorly modified triggers and whatnot?

I have an early model (~mid 60s) that I've always wondered about a potential issue. But, I've never personally experienced any problems.






Back to top
kengel2
LSU Fan
Team Gun
Member since Mar 2004
5765 posts
 Online 

re: Remington 700 misfire issues


quote:

Isn't there some year of production that marked a design change impacting this issue?


It was a very big issue with very few rifles. If you are worried just call up remington and ask.






Back to top
  Replies (0)
LouisianaChessie
LSU Fan
Baton Rouge, LA
Member since May 2010
2366 posts

re: Remington 700 misfire issues


The old 700s and first generation 770s are problematic. The new x-mark pro or whatever they hell they call it is a completely new trigger. There was a piece in them breaking and going off when different acts of the trigger/safety were performed. Even with the military rifles. No need to worry with the new ones.





Back to top
Cracker
Montana Fan
in a box
Member since Nov 2009
5991 posts

re: Remington 700 misfire issues


the trigger assembly and safety are not complicated systems, how is this possible?





Back to top
FelicianaTigerfan
LSU Fan
Baton Rouge
Member since Aug 2009
15235 posts

re: Remington 700 misfire issues


From my understanding there is a plate that is part of the safety. When you take the safety off its supposed to move the plate. Some issues they suspected the plaTe would move on its own or hang up. Never seen the inner workings of one so don't really know wtf I'm talking about





Back to top


Back to top