- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
need help disconnecting a LED strobe light on a car
Posted on 2/17/16 at 12:21 pm
Posted on 2/17/16 at 12:21 pm
can I just cut the wire and tape it up or do I need to totally disassemble? was put on aftermarket, need to remove a jeep top and its holding up the process. I dont know shite about electricity
7
Posted on 2/17/16 at 12:22 pm to Lester Earl
You stealing cop cars again?
Posted on 2/17/16 at 12:24 pm to Lester Earl
Cut and tape if you're in a hurry. Shouldn't be hard to pull though.
A little 12v isn't anything to worry about.
A little 12v isn't anything to worry about.
This post was edited on 2/17/16 at 12:25 pm
Posted on 2/17/16 at 12:36 pm to upgrayedd
quote:
You stealing cop cars again?
+1
Posted on 2/17/16 at 12:39 pm to Lester Earl
yes
Posted on 2/17/16 at 1:54 pm to Lester Earl
If you don't want to use it again, just cut it and follow the wire and disconnect it wherever it is wired.
Also, are you removing a hardtop or softtop? I'm guessing a hardtop if it was added to the jeep. Be careful when lifting it to not break the back glass. I use a hand crank hoist in my garage for mine, but in a pinch I've asked my wife or her brother for a hand. They're not that heavy, just kind of awkward getting them off and over the rollbars. I've seen pics of shattered glass on the jeep forums where people got in a hurry.
Also, are you removing a hardtop or softtop? I'm guessing a hardtop if it was added to the jeep. Be careful when lifting it to not break the back glass. I use a hand crank hoist in my garage for mine, but in a pinch I've asked my wife or her brother for a hand. They're not that heavy, just kind of awkward getting them off and over the rollbars. I've seen pics of shattered glass on the jeep forums where people got in a hurry.
Posted on 2/17/16 at 1:58 pm to Lester Earl
Just don't tape bare wires together. Tape individually then wrap together.
Posted on 2/17/16 at 2:56 pm to Lester Earl
Cut them cleanly and tape
Posted on 2/17/16 at 3:12 pm to Lester Earl
I'd would cut the wires and add a 2 wire connector if you plan on keeping the light.
Posted on 2/17/16 at 3:22 pm to hogdaddy
Thanks guys. Going to see if my electrician friend can rig it up so that I can just Unclip when I want to take top off but still be able to use the LED lights.
Too nice of a day today, just wanted to get the top off.
Too nice of a day today, just wanted to get the top off.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News