- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Subtle Brag / Self Appreciation Thread: Home Networking
Posted on 12/29/16 at 11:20 am
Posted on 12/29/16 at 11:20 am
I know most of you are on a much higher level than I am with home networking, but I'm here to say that you don't have to be an IT pro to make it work.
Before the flood, I always had a terrible Wi-Fi experience. Speeds were horrible (Pay for up to 150 mbps, could barely get usable service in the house). It really pissed me off.
After the flood, the sheet rock was gutted so I took it as an opportunity to revamp my system. I ran over 800' of Cat6 and installed single gang boxes. I moved the service to a more central location of the house and have it as high as possible. Last night after triple checking my terminations (contractors do not care how much work you put into anything), I installed an ethernet switch in a closet and plugged it in. Everything, so far is running better than it ever has.
So far so good! I've done small ethernet runs in the past, but this was the first big project that I've done. The hardest part was getting into a groove running the wire and crimping the terminations. Learned the tricks the hard way, but now I can make patch cables in a couple minutes.
Anyone else have any good (or bad) stories?
Before the flood, I always had a terrible Wi-Fi experience. Speeds were horrible (Pay for up to 150 mbps, could barely get usable service in the house). It really pissed me off.
After the flood, the sheet rock was gutted so I took it as an opportunity to revamp my system. I ran over 800' of Cat6 and installed single gang boxes. I moved the service to a more central location of the house and have it as high as possible. Last night after triple checking my terminations (contractors do not care how much work you put into anything), I installed an ethernet switch in a closet and plugged it in. Everything, so far is running better than it ever has.
So far so good! I've done small ethernet runs in the past, but this was the first big project that I've done. The hardest part was getting into a groove running the wire and crimping the terminations. Learned the tricks the hard way, but now I can make patch cables in a couple minutes.
Anyone else have any good (or bad) stories?
6
Posted on 12/29/16 at 11:48 am to Monday
I am a bit of a knuckledragger when it comes to networking, as well. I moved into a new house a few weeks ago and had Xfinity service brought in last week. The house has Cat5 cable throughout, but uses it for phone instead of network.
Last night I removed all of the phone jacks, bought a punch-down tool and installed ethernet plates throughout. I'm picking up an RJ45 connector tool kit this afternoon and finishing off the connections inside the panel tonight (along with swapping out the Leviton phone block module with a Cat5 replacement). I'm encouraged by your success in making terminations on the cables. Hopefully, I will have a similar outcome. Thanks for sharing.
Last night I removed all of the phone jacks, bought a punch-down tool and installed ethernet plates throughout. I'm picking up an RJ45 connector tool kit this afternoon and finishing off the connections inside the panel tonight (along with swapping out the Leviton phone block module with a Cat5 replacement). I'm encouraged by your success in making terminations on the cables. Hopefully, I will have a similar outcome. Thanks for sharing.
Posted on 12/29/16 at 12:50 pm to Monday
How many connections do you have all together?
Posted on 12/29/16 at 2:54 pm to Monday
Actually for connecting a computer to a computer(s) is the one thing I don't know how to do with computers.
It is def a weakness. I've even built my own computer.
So, props.
It is def a weakness. I've even built my own computer.
So, props.
Posted on 12/29/16 at 9:45 pm to Monday
Nice. I want to have the same kind of setup in my home but doing all of that with all of the walls in place, some of it wood paneling, has really kept me away from doing it.
Posted on 12/31/16 at 5:34 am to Monday
Very nice.
As others suggested, I would highly suggest a 24 port patch panel for your project if possible.
Super easy to install, much cleaner and you can easily repatch cross connects if needed.
As others suggested, I would highly suggest a 24 port patch panel for your project if possible.
Super easy to install, much cleaner and you can easily repatch cross connects if needed.
Posted on 1/1/17 at 12:50 am to Monday
Good for you! I would recommend just buying cables instead of making your own though, monoprice.com
I also think you should have terminated the cabling into a patch panel. Do all the cable runs into one closet and instead of adding rj45 connectors, you just use a punch down tool into the patch panel. Throw up a quick wall mounted rack and screw in your patch panel and switch. You can have your cable provider also move the ISP line there. Set up a ubiquiti there and at 60-75% of the far end of coverage you want through one on the drops with a poe switch.
Your house is SMB ready and can grow.
I also think you should have terminated the cabling into a patch panel. Do all the cable runs into one closet and instead of adding rj45 connectors, you just use a punch down tool into the patch panel. Throw up a quick wall mounted rack and screw in your patch panel and switch. You can have your cable provider also move the ISP line there. Set up a ubiquiti there and at 60-75% of the far end of coverage you want through one on the drops with a poe switch.
Your house is SMB ready and can grow.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News