- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Surround Sound installation recommendations
Posted on 9/16/14 at 9:52 am to Mahootney
Posted on 9/16/14 at 9:52 am to Mahootney
quote:
Do I pull the speaker wires myself?
absoutely you do.
man up. go to monoprice and get some fat-arse reel of 12g speaker wire. 100ft for $29 or 100ft of 14g for $25. your choice.
then grab you some banana plugs (i assume bose speakers have decent connectors). they're like $1.40 a set or $8 for a 5 pack.
then put on some old clothes & get set to crawl around under your house and/or get a drill to cut a hole in your hardwood where the speaker wires will come up.
while you're on monoprice, might as well pick up some optical cables, F HDMI to F adapters, some HDMI with ethernet cables & other crap for super cheap.
you'll be happy you did it yourself.
just make sure you measure first to see how much speaker wire you need, then buy about 25% more than you think you need because you need some slack behind the components to move them around and if you're like me, you always tend to cut the speaker wires too short.
Posted on 9/16/14 at 9:58 am to CAD703X
I also recommend one of these to put on the wall behind your stereo to keep it nice and clean:
Posted on 9/16/14 at 10:00 am to CAD703X
I should have decent access to all of the parts in the ceiling, but I think my A/C unit is above where my receiver would go.
Is there some kid of Fishing tool you can use?
Do you drill small holes in the rafter beams for the wires to run through?
Or do you run them along the roof and drove them down?
(I'm guessing along the roof, but wanted to ask.)
Is there a website that helps design the acoustic layout for non-rectangular rooms?
Is there some kid of Fishing tool you can use?
Do you drill small holes in the rafter beams for the wires to run through?
Or do you run them along the roof and drove them down?
(I'm guessing along the roof, but wanted to ask.)
Is there a website that helps design the acoustic layout for non-rectangular rooms?
This post was edited on 9/16/14 at 10:01 am
Posted on 9/16/14 at 10:09 am to CAD703X
12g wire on Bose speakers ? Damn wire will be bigger than the speakers.
Popular
Back to top
Follow TigerDroppings for LSU Football News