Started By
Message

re: Truck pulls right after new rims and tires...

Posted on 7/21/14 at 2:41 pm to
Posted by Gaston
Dirty Coast
Member since Aug 2008
39066 posts
Posted on 7/21/14 at 2:41 pm to
Not even, I was in BSL. Roof rack and Bestop with black wheels? Crazy, I've never seen a setup like it. That's most people's comment as well...

The only thing that's plasti dipped on my truck is the rear bumper, which Toyota sells in black on the lower models.

Truck still pulls after an alignment and a check, they say it 'crowns' though.
Posted by KYINYOI
Lower St. Bernard
Member since Jun 2009
490 posts
Posted on 7/21/14 at 2:48 pm to
Same exact set up ...except I think it was black, I was heading westbound so I couldn't tell the type of wheels, not sure if they were steelies, but they were black as well.

Posted by meauxjeaux2
watson
Member since Oct 2007
60283 posts
Posted on 7/21/14 at 3:02 pm to
i can fix your issue Gaston. Just because alignment is "in spec" does not help pull issues which are almost always tires btw. You need to push caster forward on the right wheel by one degree over the left side to correct and "drift" associated with alignment. Many alignment techs do not know this. All they know is what the Hunter machine tells em is in spec. This only applies to rear wheel drive vehicles.
Have you crossed the front tires to see if it starts pulling left yet? Are the tires directional?
Posted by greasemonkey
Macclenny Fl aka south JAWJA
Member since Aug 2012
2765 posts
Posted on 7/21/14 at 3:50 pm to
you def. need to swap tires side to side, if you havent already.
If it still pulls to same side have alignment shop do as mj2 said a couple post up
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram