Started By
Message
locked post

Best way to skull mount deer?

Posted on 1/6/13 at 12:22 pm
Posted by Slickback
Deer Stand
Member since Mar 2008
27686 posts
Posted on 1/6/13 at 12:22 pm
I've done it before with the kit from Cabelas but have another I want to mount.


How do y'all do it? Tips? Advice?

Posted by SaDaTayMoses
Member since Oct 2005
4324 posts
Posted on 1/6/13 at 12:24 pm to
Cut everything you can off of it then boil it to get the rest off. Then let skull sit in a bucket of bleach for a while
Posted by KingRanch
The Ranch
Member since Mar 2012
61614 posts
Posted on 1/6/13 at 12:24 pm to
I'm all ears too
Posted by DownshiftAndFloorIt
Here
Member since Jan 2011
66763 posts
Posted on 1/6/13 at 12:35 pm to
Cut the shite off that you can get to

Put in a pot of almost boiling water for about 3 hours

Get everything else out. Coat hanger for the brains

Pressure wash it if some of the stuff refuses to go

Buy some women's hair bleach paste stuff (should be peroxide-based) and put that on it
Posted by BFIV
Virginia
Member since Apr 2012
7747 posts
Posted on 1/6/13 at 12:44 pm to
I've done a heap of European mounts. Most adult deer skulls are about the same size. AFTER you remove as much of the meat (eyeballs, tongue, flesh, and brains), get one of those big, blue vegetable canning pots and mix in about one cup of 20 Mule Team Borax with the water. You need to submerge the entire skull to right below the antlers and bring to a full, easy simmer boil until the soft tissue either falls off or you can get it off with whatever small tool you may use. Don't forget to remove as much of the brain tissue from the skull via the small hole at the bottom of the skull where the spine was joined to the skull BEFORE you start to boil it. (It's a PITA if you don't.) The borax is a preservative and also helps to keep the teeth from cracking and/or falling out during and after the boil. Whether you prefer the bottom and top jaw bones is a matter of personal preference, but be aware that the bone/cartilage tissue along the nose and jawbones is very fragile and must be handled with great care. Some folks use bleach to whiten the skull, but I always used H202 (hydrogen peroxide). You can also wrap the horns with cloth and just hang the boiled and cleaned skull somewhere out in the sun where the sun will naturally bleach the skull, too. This does take quite a bit of time, though. If the skull doesn't bleach out as white as you prefer, you can air brush the skull with a "bass belly white" or even brighter shade of white with water soluble air brush paint. Or...you can just leave it as it is after the bleach and peroxide treatment. No matter how clean you prepare the skull before boiling, you are going to have to clean out and off a lot of residual tissue before setting it aside to dry. Hope this helps.
Posted by DeboseKnows
Gainesville
Member since Dec 2012
1721 posts
Posted on 1/6/13 at 12:44 pm to
I cut off most everything that i can then bury it for a couple months.. After that I boil it.

I dont like when skull mounts are too white, I like a more natural color to them.
Posted by Ice Cream Sammich
Baton Rouge
Member since Apr 2010
10116 posts
Posted on 1/6/13 at 2:54 pm to
Scrape off what you can. Wire skull to a cinder block and throw in a ant pile. Leave for a few days. Check and ensure that everything is gone and clean. Wash. Use dark brown shoe polish on horns and bleach on the skull. Nail to a piece of wood. It gives it a different and rich look.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram