Trying to move from wifi through a Ubee DDW365 provided by Cox (Modem/Terrible Router Combo) and begin using my Belkin AC1200 but can't get my ports opened, apparently.

I can access the internet while connected to my Belkin wifi but I can't access my server via SSH, my domain or FTP...Any ideas?

edit: I can access my server via SSH from within my network but can't even get ftp while on my network.

This post was edited on 4/18/16 at 4:36 pm

1 ...

Report Post

Posted by CubsFanBudMan

Member since Jul 2008

5070 posts

Posted on 4/18/16 at 4:39 pm to TheJacer

Did you disable the DHCP Server on the Ubee?

Here's a link to the user manual LINK

1 ...

Report Post

Posted by TheJacer

Member since Nov 2012

789 posts

Posted on 4/18/16 at 4:40 pm to CubsFanBudMan

I did disable DHCP, and I turned off the primary network, which was the only way I could find to get the wifi to stop broadcasting.

1 ...

Report Post

Posted by CubsFanBudMan

Member since Jul 2008

5070 posts

Posted on 4/18/16 at 4:46 pm to TheJacer

You should be able to just disable the wireless radio.

What IP address are you using for the Ubee and the Belkin?

Maybe try setting the DMZ on the Ubee to the Belkin IP address?

1 ...

Report Post

Posted by TheJacer

Member since Nov 2012

789 posts

Posted on 4/18/16 at 5:00 pm to CubsFanBudMan

quote:
Maybe try setting the DMZ on the Ubee to the Belkin IP address?

This was my next step.

For some reason the wireless radio won't let me change the setting. The box is there but is inoperable and is stuck on enabled. I tried adding the MAC address of the Belkin to the pass through table but I don't really know what that does lol.

Page 1