- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Advice from the home construction guys
Posted on 10/28/14 at 3:09 pm
Posted on 10/28/14 at 3:09 pm
The term "corner pops" regarding concrete foundation, is it anything to worry about?
Posted on 10/28/14 at 3:14 pm to chuckie
This post was edited on 10/28/14 at 3:16 pm
Posted on 10/28/14 at 3:34 pm to chuckie
Depends on size and depth. Got pics?
Posted on 10/28/14 at 3:37 pm to chuckie
quote:
The term "corner pops" regarding concrete foundation, is it anything to worry about?
Is that the name of your concrete finisher?
Posted on 10/28/14 at 3:47 pm to chuckie
A pretty common phenomenon stemming mostly from improper barrier installation behind the brick veneer at the brick shelf.
As other posters have stated it depends on the size of the condition as to whether or not it is a foundation issue.
As other posters have stated it depends on the size of the condition as to whether or not it is a foundation issue.
Posted on 10/28/14 at 8:49 pm to AndyCBR
It's right at the corner at 2 corners of the slab. It looks minor in that
The corner chunk of concrete is missing no more than 2-3 inches. It doesn't look like it supports anything and has been there a while
Slab is 20 years old at most
The corner chunk of concrete is missing no more than 2-3 inches. It doesn't look like it supports anything and has been there a while
Slab is 20 years old at most
This post was edited on 10/28/14 at 8:50 pm
Posted on 10/28/14 at 9:24 pm to chuckie
The biggest problem that this could cause is whether rebar is exposed. If the chunk exposes the rebar then you need to take care of it now because rust can chase the rabar and frick up your slab.
Posted on 10/28/14 at 9:46 pm to Warfarer
Rebar is always rusting because it is esposed to air and moisture
No matter wether a bridge or slab
No matter wether a bridge or slab
Posted on 10/28/14 at 9:47 pm to chuckie
Need to see a pic...
I am guessing the house has a brick veneer?
I am guessing the house has a brick veneer?
Posted on 10/28/14 at 9:52 pm to ApexTiger
the crack on the slab.- at the corner (just under the brick) is usually caused from the brick expanding and pushing the corner out and ultimately cracking it /breaking off.
Brick is a veneer like siding and nothing structural.
I need to see it, but it's probably nothing but cosmetic.
Brick is a veneer like siding and nothing structural.
I need to see it, but it's probably nothing but cosmetic.
Posted on 10/28/14 at 9:55 pm to Drop4Loss
quote:
Rebar is always rusting because it is esposed to air and moisture
No matter wether a bridge or slab
Rebar should never be rusting if properly installed. Most engineers call out at least 2" clearance from all edges of concrete.
Posted on 10/29/14 at 4:37 pm to Warfarer
quote:
Rebar should never be rusting if properly installed. Most engineers call out at least 2" clearance from all edges of concrete.
I wouldn't say "Never", it depends on the environmental conditions.
Bare rebar that is only 2" deep in concrete can most certainly corrode given the right exposure. Concrete is porous.
This is why epoxy coated rebar is specified in many applications.
Popular
Back to top
Follow TigerDroppings for LSU Football News