- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
1
Posted on 6/28/15 at 11:59 pm to GalvestonTiger12
I have one..its a like savor!!
Posted on 6/29/15 at 12:35 am to BugaPainTrain7
The oil is better than any gun oil.
The cleaner is a milder version of the old Ed's Red mix. Works great.
Just remember with lube, less is usually more when Applying.
You can spend 13 bucks on a tiny bottle of moly lube, but it works no better at rust prevention and doesn't seem to protect as well when it comes to wear.
The cleaner is a milder version of the old Ed's Red mix. Works great.
Just remember with lube, less is usually more when Applying.
You can spend 13 bucks on a tiny bottle of moly lube, but it works no better at rust prevention and doesn't seem to protect as well when it comes to wear.
Posted on 6/29/15 at 6:20 am to MoreOrLes
quote:
I know you are way more in the know then me but i thought dry firing a gun is bad for the gun.
Well the short answer is, it depends on the gun. But for nearly all modern firearms, it isn't detrimental.
For older 22lr handguns and rifles it can be an issue since the firing pin is shaped differently. Since rimfire firing pins have to impact a larger area, the firing pin is box-shaped. Dry firing one can cause it to sheer and not work. There may be more to it than this but this is how I understand it.
As for modern striker-fired or hammer-fired handguns, dry fire all day long. Personally, I wouldn't buy a gun if I couldn't dry fire it.
Posted on 6/29/15 at 7:02 am to bapple
22's and other rimfire guns have problems when dry firing because the firing pin hits the rim of the case. Without a cartridge in the chamber the firing pin will sometimes contact the edge of the barrel which is much harder than a brass case.
Posted on 6/29/15 at 7:41 am to Buck_Rogers
Shoulda bought a Glock
Posted on 6/29/15 at 7:48 am to X123F45
Okay thanks for the advice 
Posted on 6/29/15 at 7:51 am to Buck_Rogers
quote:
contact the edge of the barrel which is much harder than a brass case.
And depending on the gun, either the firing pin takes a beating or it is hard enough to pean the edge of the barrel which will cause ejection/loading issues.
Posted on 6/29/15 at 3:11 pm to BugaPainTrain7
quote:
I'm still bleeding. I went and shite today and it was amazing.
Posted on 7/14/15 at 11:51 am to Hu_Flung_Pu
This is the Holster I bought from Sig
Posted on 7/14/15 at 12:24 pm to BugaPainTrain7
quote:
What's a good solution to clean and grease the gun?
Break Free or Ballistol work great and were designed for firearms. If you want to go the two stage route, use anything like Hoppes #9 to clean and a firearm lubricating oil to grease. All of this stuff was designed for these purposes. Engine oil was designed for engines. Gun oil was designed for guns. Neither will do better at the other's job.
Page 2 of 2
Popular
Back to top
Follow TigerDroppings for LSU Football News