Page 1
Page 1
Started By
Message

LA Slat Trap Regulations- Where are they?

Posted on 2/28/16 at 2:33 pm
Posted by GumboPoBoy
Member since Jun 2015
324 posts
Posted on 2/28/16 at 2:33 pm
I'd greatly appreciate it if someone could point me to where LINK hides their regulations & other info on slat traps. I'm going to build a set and want to make sure I'm doing it per all the regs.

TIA
Posted by dragboatscott
Member since Mar 2007
422 posts
Posted on 2/28/16 at 3:28 pm to
I'm not sure where they are. I build mine with 1 1/2" gaps on the sides. I believe the law says they can be no smaller than 1". There's also places you can't use them so you might want to look into that as well.
Posted by farad
non-entity of St George
Member since Dec 2013
9653 posts
Posted on 2/28/16 at 3:57 pm to
per LWF site


Slat Trap: any device, used solely for the capture of catfish, which is cylindrical, rectangular,
or square in cross section configuration, constructed of slats forming the length of
the trap, with at least one pair of slats spaced at least 1 inch apart from each other on at
least three sides of the trap and which is no more than 6 feet in length, 2 feet in diameter
or width and which has one or more cone-shaped throats, flues or entrances
Posted by Bucktail1
Member since Feb 2015
3187 posts
Posted on 2/28/16 at 3:57 pm to
No round traps and they cannot be wrapped in any material, slats no smaller than 1".
Posted by 007mag
Death Valley, Sec. 408
Member since Dec 2011
3873 posts
Posted on 2/28/16 at 5:23 pm to
Page 10
Edited to correct page typo
This post was edited on 2/28/16 at 6:07 pm
Posted by GumboPoBoy
Member since Jun 2015
324 posts
Posted on 2/28/16 at 6:38 pm to
Greatly appreciated!
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram