Started By
Message
locked post

input on Honda Recon

Posted on 4/2/13 at 8:14 pm
Posted by bonescanner
Member since Oct 2011
2238 posts
Posted on 4/2/13 at 8:14 pm
looking at maybe buying a new four wheeler. I'm not planning on doing any mudding, just to and from the stand. Haul corn etc. What do you guys know about the recon?
Posted by KingRanch
The Ranch
Member since Mar 2012
61590 posts
Posted on 4/2/13 at 8:16 pm to
Typical bulletproof Honda
Posted by 4X4DEMON
NWLA
Member since Dec 2007
11957 posts
Posted on 4/2/13 at 8:16 pm to
My old 95 was awesome. I wish I wouldn't have sold it. I dont know much about the newer ones. It's a honda, so it's gonna be good.
Posted by Rize
Spring Texas
Member since Sep 2011
15754 posts
Posted on 4/2/13 at 8:17 pm to
I have a Rincon and love it. Although I haven't seen it in 6 months since leaving it at a buddies house.
Posted by bonescanner
Member since Oct 2011
2238 posts
Posted on 4/2/13 at 8:18 pm to
It's only a 250, two wheel drive. Last bike I had was a 350 4x4. I never really needed the 4x4 so I wasn't going to spend the extra money. Anything I'm not thinking about.
Posted by 4X4DEMON
NWLA
Member since Dec 2007
11957 posts
Posted on 4/2/13 at 8:20 pm to
The 250 will bog down a bit when put under stress with a load, the SRA will get hung on anything higher than a thimble, there's not a lot of room on the seat if you plan on riding with anybody (kids, wife, etc).
Posted by Hammertime
Will trade dowsing rod for titties
Member since Jan 2012
43030 posts
Posted on 4/2/13 at 8:48 pm to
I used one all throughout high school. 250 2wd with stock Goodyears. Got me to and from anywhere I needed to go. Also was surprisingly good in the mud. A plus side to it being small is the weight. If you get stuck, you can easily just pick it up and move it

It would be a good purchase IMHO, and I didn't want anything else while I had it
Posted by Slickback
Deer Stand
Member since Mar 2008
27678 posts
Posted on 4/2/13 at 8:51 pm to
I had one with a set if swampers on the back. It ran like a sonofabitch bitch. It bogged down a few times, but it's so light I just hopped off, picked it up out the hole, and got back after it.

Then somebody decided that they wanted it and figured I shouldn't have it anymore. Covksuckers.
Posted by 4X4DEMON
NWLA
Member since Dec 2007
11957 posts
Posted on 4/2/13 at 8:53 pm to
quote:

picked it up out the hole, and got back after it.


Great point. I did love that about mine
Posted by Hammertime
Will trade dowsing rod for titties
Member since Jan 2012
43030 posts
Posted on 4/2/13 at 8:55 pm to
It was also very easy to wheelie. The rack on the back of mine had to get painted once a month from my dumb arse riding wheelies around the neighborhood
Posted by 4X4DEMON
NWLA
Member since Dec 2007
11957 posts
Posted on 4/2/13 at 8:58 pm to
yea buddy. I didn't have the weight to just lean back and pop a wheelie so I had to stand on the rack to get it. I did slam mine into a 4" fence post and only had to replace the front bumper after heating it with the torch and bending it back in shape failed.
Posted by Capt ST
Hotel California
Member since Aug 2011
12804 posts
Posted on 4/2/13 at 9:10 pm to
Got one a year or so after they came out with the ES model. I purchased it because the lease I was hunting was swamp and I got tired of fighting a big bike. If was nice to hop of pick up rear move 4', then do the same up front. I've put her under more than once, and she's still running like a scalded dog.


One her second teenager also.
This post was edited on 4/2/13 at 9:13 pm
Posted by Hammertime
Will trade dowsing rod for titties
Member since Jan 2012
43030 posts
Posted on 4/2/13 at 9:18 pm to
Would not recommend an electronic shift. Their gearing is different for some reason than regular shift ones, and they don't make as much low end power, but have a higher top end.

I've also seen 5 or 6 if them break and have to be put into gear by hand.


Call me old fashioned, but you can't beat a manual shifter
Posted by 4X4DEMON
NWLA
Member since Dec 2007
11957 posts
Posted on 4/2/13 at 9:21 pm to
Every ES I've ran across had problems at some point during ownership. I like a manual shift myself.
Posted by Capt ST
Hotel California
Member since Aug 2011
12804 posts
Posted on 4/2/13 at 9:22 pm to
It did malfunction a couple of times and I do wish I would have gotten the old shift. Can't steer, shift and drink beer at the same time. I got a really good deal and after seeing my son struggle with the shifting on the big bike I figure arrow up and arrow down was dummy proof.
Posted by 4X4DEMON
NWLA
Member since Dec 2007
11957 posts
Posted on 4/2/13 at 9:32 pm to
The lack of a beer holding hand was a big no-no in my book
Posted by Capt ST
Hotel California
Member since Aug 2011
12804 posts
Posted on 4/2/13 at 9:33 pm to
First day I used it I was
Posted by Bill Parker?
Member since Jan 2013
4468 posts
Posted on 4/2/13 at 11:20 pm to
Bulletproof, as said earlier. My 99 300 2wd takes a lickin' and keeps on tickin'.

The only drawbacks will be: 1) hard to steer with a load (distribute weight on front and back 2) 2wd is not as safe to load into a truck bed as 4wd. I haven't killed myself yet, and this is the only way I haul mine. Use common sense, and put a bag of corn on the front rack.
Posted by 4X4DEMON
NWLA
Member since Dec 2007
11957 posts
Posted on 4/2/13 at 11:21 pm to
I ended up underneath mine twice while trying to load it into the back of the truck. In both cases the tire/ramp were wet though.
Posted by Capt ST
Hotel California
Member since Aug 2011
12804 posts
Posted on 4/3/13 at 12:01 am to
Daughter was loading stuff on it and taking it to the street for me the other day. She's gotten kind of comfortable on it and came around the corner and whipped it around on 2 wheels her momma came unglued. They are light, good and bad thing.
first pageprev pagePage 1 of 2Next pagelast page

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram