Antler Mount Kit (found)

Looking for something almost identical to the first picture, not a skull just a cover with the brass brads or as similar as possible.

I have one exactly like the first picture, but it came from a taxidermist. If that helps you out...

I've done homemade like THIS using Crown molding and plaster.

I'd probably just clean the skull cut edges up a little bit and stick it to the drift wood with a couple pieces of heavy steel wire, through around the skull part, through holes in the drift wood and bent down in the back. Once the steel rusts over/dulls a little it'd look pretty rugged.



I thought I've seen those kits at academy before though

quote:

---

Never thought of doing that with the wire, would probably look better with the whole skull though, if you have examples of some pics post them.

---

I've seen someone do it before just with extra racks they had hanging around and stuck on driftwood. I liked it. I've only done a euro mount though. Don't have any pics. I'll see if I can dig something up online similar to what I'm thinking of.

Thats pretty much what we did with some of the smaller racks at the old hunting camp around the skinning shed, think I found it after some detailed googling, might try the next one I skull mount with the wire.

Kit
Plastic plate

That's the one, I found it on Vandykes and posted it on the link above your post.

Thanks though...