So I built my computer a few weeks back and I have had no problems. The computer runs well, the temps are low, and I can crush some games without a problem.
I have two drives installed. A Samsung Pro SSD as a boot drive and a Seagate Barracuda HDD. The only issue I have had recently is when I enter into the UEFI the screen freezes and I get an "A6" report on my motherboard (ASRock Z87 extreme 6).
According to the ASRock manual, the A6 error means there is a problem "related to IDE or Sata devices." They suggest re-installing IDE and SATA devices.
My question is what is the best way to re-install these things? I really don't want to start all over loading everything. The drivers are up to date for both drives.
Could it be that the SATA controllers are conflicting? I have the following listed under device manager IDE ATA/ATAPI Controllers:
ETA: Just needed to update the UEFI....
This post was edited on 8/18 at 6:26 pm