Page 1
Page 1
Started By
Message

SLI Problem...Need help

Posted on 3/1/15 at 4:00 am
Posted by DREADS r SICK
Baton Rouge
Member since Feb 2011
419 posts
Posted on 3/1/15 at 4:00 am
So I just got my second 970 and I installed it along with the SLI bridge the. Wiped and reinstalled my drivers and enabled SLI. When I launch a game with SLI enabled it either flickers badly or crashed. I made sure the card were seated properly then tried again, no cigar, swapped the cards, still no luck. I ran each card individually I'm both slots on the mobo both worked fine on their own. I'm not sure what my problem is, but I think my SLI bridge could be bad. Any info would be appreciated. If it is the bridge can I pick one up locally in Baton Rouge or do I have to order it online.
Posted by ILikeLSUToo
Central, LA
Member since Jan 2008
18018 posts
Posted on 3/1/15 at 11:26 am to
Your best bet to get one locally is to call local computer repair shops and see if they have any spares laying around. The bridges come with any SLI-capable mobo. Repair shops should have bins of unused cables and accessories that ship with various hardware, so they might be willing to part with one for cheap or even free.
Posted by DREADS r SICK
Baton Rouge
Member since Feb 2011
419 posts
Posted on 3/1/15 at 3:31 pm to
Could this be a driver issue. Or do you think it's mos likely the bridge
Posted by ILikeLSUToo
Central, LA
Member since Jan 2008
18018 posts
Posted on 3/1/15 at 4:08 pm to
Since I've never encountered the issue, I don't know. Although flickering is usually indicative of a game not properly supporting SLI, it could very well be a driver or hardware problem if it's happening in every game (or crashing).

If a driver reinstall doesn't work, it's more than likely a hardware problem, which can include anything from the SLI bridge to a bad PCIe slot or inadequate power. The bridge would be the easiest first test.
This post was edited on 3/1/15 at 4:15 pm
Posted by DREADS r SICK
Baton Rouge
Member since Feb 2011
419 posts
Posted on 3/2/15 at 6:28 pm to
Ok so I have somewhat of a solution. Games only flicker when in full screen. In windowed mode or border less windowed they work perfectly fine? Any idea why?
Posted by ILikeLSUToo
Central, LA
Member since Jan 2008
18018 posts
Posted on 3/2/15 at 6:30 pm to
Probably because SLI isn't working in windowed mode. Check your GPU usage while gaming in windowed mode.
Posted by DREADS r SICK
Baton Rouge
Member since Feb 2011
419 posts
Posted on 3/2/15 at 6:53 pm to
It's working i windowed mode. I checked on afterburner.
Posted by DREADS r SICK
Baton Rouge
Member since Feb 2011
419 posts
Posted on 3/2/15 at 6:55 pm to
With one card on dying light I get 60-70 FPS in SLI windowed I get 120-130. So it's working. Just don't understand y It won't work in full screen.
Posted by DREADS r SICK
Baton Rouge
Member since Feb 2011
419 posts
Posted on 3/2/15 at 6:59 pm to
Pity PCI slots work with both cards individually so it not the card or the mobo. So it's either power supply l, bridge, or software issue. My power supply is almost brand new just got to in December it's the corsair cx 750 m so it should be plenty. I have a friend with an identical setup and his work perfectly
Posted by ILikeLSUToo
Central, LA
Member since Jan 2008
18018 posts
Posted on 3/2/15 at 7:23 pm to
cant be the PSU if SLI is working in windowed. Sounding more software now... Wiped drivers and reinstalled?
Posted by DREADS r SICK
Baton Rouge
Member since Feb 2011
419 posts
Posted on 3/2/15 at 8:12 pm to
Yes three times. Even did a reinstall of windows. I just dont know what to do only thing I haven't tried is another bridge I'm picking one up Tommorrow. I know your one of the most knowledgeable guys on here. So I appreciate the advice. But I've researched and tried everything. It's just so puzzling.
Posted by ILikeLSUToo
Central, LA
Member since Jan 2008
18018 posts
Posted on 3/2/15 at 11:41 pm to
Yeah, this one is new to me. You've tried all the standard stuff, other than the bridge. If a new bridge doesn't work, the next thing, if at all possible, would be to get an entirely different set of video cards to try in SLI, as well as try your cards in another system. You said your friend has an identical setup, so that would be convenient if he lives close by.
Posted by DREADS r SICK
Baton Rouge
Member since Feb 2011
419 posts
Posted on 3/3/15 at 5:18 pm to
Well he lives in Seattle we are gaming buddies. But just got new bridges on the way home to test them I'll post results
Posted by DREADS r SICK
Baton Rouge
Member since Feb 2011
419 posts
Posted on 3/3/15 at 6:19 pm to
Installed the new bridge and instant success what a relief. Thanks for the help
Posted by i am dan
NC
Member since Aug 2011
24722 posts
Posted on 3/4/15 at 7:46 am to
Have you tried using another driver? Could possibly be a finicky driver if you're using a new beta driver or something.

Edit: didn't see your last post. Glad you got it working.
This post was edited on 3/4/15 at 7:47 am
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram