re: Starting Woodworking, what should I get?

You don’t really need a router table. Just a router will be fine.

But without a table saw and sled, you’re going to struggle with any sort of fine cutting, if things don’t fit off the circular saw cut. Especially if you don’t have a 12” or sliding miter saw. Problem is, any table saw worth buying is going to run you at least $500 unless you’re willing to go used.

IMO, you don’t need any of the Kreg jigs. I have both you mentioned and prefer to build cabinets without them.

You might think about some sort of paint sprayer. If you’re spraying latex, the mid range wagners will work. If you’re spraying non-water based, you might get by with a harbor freight gravity fed gun and using your compressor.