- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Trouble getting into 4low
Posted on 5/3/16 at 10:45 pm
Posted on 5/3/16 at 10:45 pm
I just bought an 06 silverado z71 and I am having trouble getting it into 4 low. It will go into 4 high no problem but when the 4 low button is pressed you hear a clunk in the back but it just stays in 2 high. this is my first 4x4 truck. any help is good help. thanks!
Posted on 5/3/16 at 10:47 pm to felps22
Are you putting it in neutral? Has to be in neutral to go to 4 low
Posted on 5/3/16 at 10:48 pm to felps22
Only help I can give is tell you to buy a Ford next time
Posted on 5/3/16 at 10:56 pm to FelicianaTigerfan
its in neutral and ive tried the 2 mph roll in neutral too but no dice.
Posted on 5/3/16 at 11:28 pm to felps22
Have you done this?
2hi
Press 4hi and it engages
Neutral stopped
Press 4lo
I can't remember if you are allowed to go straight from 2wd to 4lo or not, but the above process is how I've always done it
2hi
Press 4hi and it engages
Neutral stopped
Press 4lo
I can't remember if you are allowed to go straight from 2wd to 4lo or not, but the above process is how I've always done it
Posted on 5/3/16 at 11:37 pm to Hammertime
Try what hammer suggests and backing up a bit afterward. Sometimes 4 low is just persnickety.
Posted on 5/3/16 at 11:43 pm to Mid Iowa Tiger
I move my arse back and forth in the seat when it's being pissy. Also works for shifting out of park
Posted on 5/3/16 at 11:58 pm to felps22
mine says it's in 4 low but until I manually turn the hub locks it's not
Posted on 5/4/16 at 6:30 am to felps22
had an 06 GMC that the 4L button light burnt out or just stopped working but it would shift
Posted on 5/4/16 at 6:39 am to MorningWood
4hi to 4low should do the trick. My FX4 is picky about getting into 4low as well.
Posted on 5/4/16 at 6:57 am to felps22
I have the same model and have changed the encoder motor that engages the 4wd twice and the switches that send the signal to the motor. Knock on wood, 164k miles and no issues other than those.
Posted on 5/4/16 at 9:08 am to magicman534
quote:
changed the encoder motor that engages the 4wd twice and the switches that send the signal to the motor.
I hate to sound like an old get off my lawn type, but to me this is unnecessary. Was it so hard to reach down and pull a manual shift, that was directly connected to the transfer case?
Posted on 5/4/16 at 9:16 am to felps22
Had an 04, that coder shift motor started getting squirrely at about 75K when I traded that POS off. Cranked the truck one day and the somb was in 4L! I used to turn the engine off to shift to 4L in the 04 and previous 94 I had.
Posted on 5/4/16 at 10:31 am to White Bear
I had an 04 and the switch went completely out. I don't trust those damn buttons. My current truck has a shifter on the floor.
Posted on 5/4/16 at 12:16 pm to upgrade
The generation before his was always blowing 4wd actuator fuses on the floor shifter
Posted on 5/4/16 at 12:34 pm to Hammertime
If you have a floor shift, isn't the actuator only for the front differential? You'd still be stuck in 2wd, but the transfer case should shift with the lever, right?
Posted on 5/4/16 at 12:43 pm to upgrade
Yep. The floor shift goes straight to the shift fork.
Posted on 5/4/16 at 12:48 pm to upgrade
Yes. It's like not locking your manual hubs or when a Ford can't make vacuum pressure
Posted on 5/4/16 at 1:17 pm to upgrade
The actuator went out on my 94 and I had 2L ability for a while.
Popular
Back to top
Follow TigerDroppings for LSU Football News