- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Week 31 of 52 Weekly Golf Thread; WGC Week
Posted on 7/28/14 at 11:23 am to BRgetthenet
Posted on 7/28/14 at 11:23 am to BRgetthenet
theBeard (and other equipment gurus), I have an old shaft from when I bought my Adams F11. It snapped off in the hosel one of the first weeks I had the driver. So I bought a new one of the same shaft and put it in the F11.
With the BB Alpha tip in, it measures a little over 44". But where the shaft broke it is a little jagged. Could I have it trimmed (to make the edge smooth) and installed in the BB Alpha tip and be good to go? Should I not use it since it broke on me before?
And if that doesnt work, would pulling my shaft from my F11 work?
With the BB Alpha tip in, it measures a little over 44". But where the shaft broke it is a little jagged. Could I have it trimmed (to make the edge smooth) and installed in the BB Alpha tip and be good to go? Should I not use it since it broke on me before?
And if that doesnt work, would pulling my shaft from my F11 work?
Posted on 7/28/14 at 11:49 am to bamafan425
wording is confusing but are you asking if you can put the shaft that broke into another head? The answer is yes, but if it broke at the hosel you likely lost 1.25" of the tip and putting that into another club it most likely play short and a flex stiffer (basically being tipped 1.25")
Popular
Back to top
Follow TigerDroppings for LSU Football News