- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: best place in BR to take a Beretta 3901 that needs fixing?
Posted on 4/5/14 at 11:23 am to gorillacoco
Posted on 4/5/14 at 11:23 am to gorillacoco
will it not cycle different types of shells, or have you just tried one? I own this gun and have not experienced any issues. I did however hammer about 50-75 higher dram loads through it though when I bought it new. I have heard of low brass light loads not cycling sometimes if you don't break it in with heavier shells.
What have you shot through it and how is it hanging up? Not ejecting I assume, but wanted to ask.
What have you shot through it and how is it hanging up? Not ejecting I assume, but wanted to ask.
This post was edited on 4/5/14 at 11:26 am
Posted on 4/5/14 at 11:29 am to POONHOUND
quote:
will it not cycle different types of shells, or have you just tried one?
i've shot low brass 2.75", high brass 2.75" and high brass 3".
i've put 6-7 boxes of high brass through it. another couple of boxes of target loads.
quote:
how is it hanging up? Not ejecting I assume
it ejects fully and loads the next shell, but unless you jam the bolt forward by hand, or pull back the bolt and let it ram foward again, it won't fire the next shell.
This post was edited on 4/5/14 at 11:30 am
Popular
Back to top
Follow TigerDroppings for LSU Football News