- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Official AR-15 thread
Posted on 2/9/17 at 5:13 pm to Glock17
Posted on 2/9/17 at 5:13 pm to Glock17
If you don't have roll pin holders/punches, I've done quite a few with just a set of channel locks. Tape the hell out of the receiver and the channel locks though, and even then you run a pretty high risk of scratching the receiver.
2
Posted on 2/9/17 at 5:20 pm to Soul Gleaux
I don't have the punches so I used a lot of painters tape to avoid scratches and I took a regular sized nail, cut the tip off with my needle nose pliers making it a flat end then used a hammer to tap it in and it worked with no problem.
Posted on 2/10/17 at 8:39 am to Soul Gleaux
quote:
If you don't have roll pin holders/punches
You can get these on Amazon for so cheap, it's almost pointless not to have them. So many uses for roll pin punches and a complete hex key set.
The part that hurt the most for me to buy was the Geissele reaction rod. Expensive, but god damn if it doesn't make working on barrels, handguards, muzzle devices, gas blocks a million times easier.
This post was edited on 2/10/17 at 8:41 am
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News