- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Official AR-15 thread
Posted on 2/4/13 at 9:51 pm to RATeamWannabe
Posted on 2/4/13 at 9:51 pm to RATeamWannabe
quote:
most of them on PK are SBRs though, 9 and 11in barrels
Perfect.
Posted on 2/4/13 at 9:51 pm to CP3
But doesn't the A2 that's on the one I linked put it to 14.5? I think a 3" hider at the end might look a little goofy.
Posted on 2/4/13 at 9:52 pm to CP3
I just picked up that exact image except a 16in
Both uppers came in today
Both uppers came in today
Posted on 2/4/13 at 9:53 pm to Drew Orleans
NO. THE A2x2 ON THE 14.5 PUTS IT AT 16.
The A2 on the one you linked is a standard A2. Not a x2. They take it off and put a A2x2 on. It will look like that picture.
The image you linked has the A2 standard, looks fine. The image he linked is a 14,5 with the x2, and it still looks fine.
The A2 on the one you linked is a standard A2. Not a x2. They take it off and put a A2x2 on. It will look like that picture.
The image you linked has the A2 standard, looks fine. The image he linked is a 14,5 with the x2, and it still looks fine.
This post was edited on 2/4/13 at 9:55 pm
Posted on 2/4/13 at 9:56 pm to RATeamWannabe
Everything I pull up on pk gives me a no items in this section page, am I looking in the wrong spots?
Posted on 2/4/13 at 9:57 pm to RATeamWannabe
I think were on the same page but I'm doing a shitty job of getting my point across.
The A2 that is on there currently puts it at 14.5 which is too short. If they put an A2x2 on there it will make it 16". So the new A2x2 hider by itself is 3" long?
If so does it not look a little out of proportion?
The A2 that is on there currently puts it at 14.5 which is too short. If they put an A2x2 on there it will make it 16". So the new A2x2 hider by itself is 3" long?
If so does it not look a little out of proportion?
Posted on 2/4/13 at 9:58 pm to Drew Orleans
quote:
I think a 3" hider at the end might look a little goofy.
Drew, I suck at math. But 14.5+1.5=16. You do not need a 3in hider. Its barely noticeable.
Posted on 2/4/13 at 9:59 pm to RATeamWannabe
In all reality the flash hiders/muzzle devices on the 14.5" are only about 1.5" maybe 1.6". I do not who is throwing out this 3" number.
Posted on 2/4/13 at 10:00 pm to RATeamWannabe
I thought the A2 was 1.5" and the A2x2 was 3". So if the 13" upper has an A2 it makes it 14.5" but if it has an A2x2 it's 16"
Posted on 2/4/13 at 10:00 pm to Drew Orleans
No the barrel is only 14.5" with the regular flash hider, I believe it only makes it to 15" since the flash hider adds a little over 1" to the barrel.
Posted on 2/4/13 at 10:00 pm to Drew Orleans
No, because the BARREL is 14.5, they dont measure the end of the standard flash. As it sits with the standard, its a 14.5 barrel, and 15.5 total. But when you weld and pin a A2x2 or other compensator, it becomes a permanent attachment, and then its measured from the end of the device
Posted on 2/4/13 at 10:01 pm to Yat27
quote:
Did you fellas see that Daniel Defense announced an integrally suppressed DDM4 in 300 AAC Blackout? They permanently weld the suppressor (5.7 inches), so that you only require one stamp for a suppressed SBR (10.3 inch barrel + suppressor length=16 inches overall). Only problem is that MSRP is going to be around $3000.
Damn I just saw this. I reallly wish I had 3 grand to waste.
Posted on 2/4/13 at 10:03 pm to RATeamWannabe
Hol-E frick.
I thought you meant the A2x2 was twice as long as the A2. God damn I was so confused.
I thought you meant the A2x2 was twice as long as the A2. God damn I was so confused.
Posted on 2/4/13 at 10:03 pm to CP3
quote:
Did you fellas see that Daniel Defense announced an integrally suppressed DDM4 in 300 AAC Blackout? They permanently weld the suppressor (5.7 inches), so that you only require one stamp for a suppressed SBR (10.3 inch barrel + suppressor length=16 inches overall). Only problem is that MSRP is going to be around $3000.
Damn I just saw this. I reallly wish I had 5 grand to waste.
3 on this, and 2 on a Colt USMC 1911
Posted on 2/4/13 at 10:03 pm to burgeman
Since the flash hider is not permanently attached to the one being advertised, they advertise the actual barrel length without the flash hider. I promise you that an a2x2 will be legal on that upper.
Posted on 2/4/13 at 10:03 pm to Yat27
Can someone explain the whole stamp thing? You need a stamp for each suppressor you own and for each SBR?
How does one get a stamp for a suppressor?
How does one get a stamp for a suppressor?
Posted on 2/4/13 at 10:04 pm to RATeamWannabe
Jesus christ I need to punch something now.
Posted on 2/4/13 at 10:05 pm to Drew Orleans
Like two monkeys trying to frick a football over here.
Sorry I am not good with explaining things over the internet
Sorry I am not good with explaining things over the internet
Posted on 2/4/13 at 10:06 pm to Drew Orleans
frick it. I'm getting the God damn thing and pinning on the A2x2.
Now, do I need to send it straight to barking irons or can I get it sent to my house and bring it myself?
Now, do I need to send it straight to barking irons or can I get it sent to my house and bring it myself?
Popular
Back to top
Follow TigerDroppings for LSU Football News