- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
2
Posted on 6/8/12 at 1:04 pm to Fratastic423
quote:
Sparge arm
Two 3-piece stainless steel ball valves
Three 1/2" NPT to 3/8" barb stainless steel nipples
12" all stainless steel false bottom
38" of plastic tubing sliced down the side (to give the false bottom a better seal)
7 feet of 3/8" thermoplastic tubbing (for sparging and run off)
6 inches of 3/8" high temperature tubing (to connect the false bottom to the 3 piece ball valve in the mash tun)
All necessary nipples, nuts, washers, and silicone o-rings
LINK
This kit.
This post was edited on 6/8/12 at 1:05 pm
Posted on 6/8/12 at 1:07 pm to Fratastic423
$188 is a lot for a cooler type mash tun. Mine has a SS braid, but I still spent less than $100 all together.
Birdman Brewing has a fully assembled on on sale now for about $165 with a SS false bottom (igloo cooler)
Polar Ware Mash Tun
Birdman Brewing has a fully assembled on on sale now for about $165 with a SS false bottom (igloo cooler)
Polar Ware Mash Tun
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News