- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Samsung LCD TV green static issue
Posted on 2/20/16 at 5:44 pm
Posted on 2/20/16 at 5:44 pm
When we turn our tv on we get a green staticky screen with screaming white noise. The tv restarts itself after about 10 seconds and that usually fixes it. Anyone know what the problem might be/ how to fix?
I googled and the best answer I found was I need to replace the capacitors. Seems like a manageable fix if that's the problem.
I googled and the best answer I found was I need to replace the capacitors. Seems like a manageable fix if that's the problem.
This post was edited on 2/20/16 at 5:45 pm
1
Posted on 2/20/16 at 10:18 pm to drexyl
You need to open the back and see if any capacitors are blown. If they are that's the problem.
If not, then most likely it's the video integrated circuit on the main board that controls the voltage level going to a coil on the other side of the board. You will need to remove the circuit and the little capacitor next to it and solder on new ones.
Either way, you'll need to open the back and do a basic troubleshoot (look at the capacitors are blown or if there are any other obvious problems)
If no capacitors are blown, watch this video and you can probably fix it yourself for under 40 bucks. LINK
My 2008 Samsung recently had the same problem, and it's only going to get worse until it stops working all together. I followed the video and fixed it. It's pretty easy.
If not, then most likely it's the video integrated circuit on the main board that controls the voltage level going to a coil on the other side of the board. You will need to remove the circuit and the little capacitor next to it and solder on new ones.
Either way, you'll need to open the back and do a basic troubleshoot (look at the capacitors are blown or if there are any other obvious problems)
If no capacitors are blown, watch this video and you can probably fix it yourself for under 40 bucks. LINK
My 2008 Samsung recently had the same problem, and it's only going to get worse until it stops working all together. I followed the video and fixed it. It's pretty easy.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News