Irons: reshafting vs buying new set

Do you want to spend a $1000 or $300-$400?

Or you can do it yourself

You can buy a used set of iron shafts off of golfwrx.

the Pxi's are $40 each = $320
most places charge around $30 each club to reshaft = $240

$560

Pxi's are $30 upcharge through titleist and AP1s are $800= $1040

But if you order through discountdansgolf.com you can get a better price on it.

quote:

---

I do miss a little the stiff feel of the S300 shaft, but not the heavy weight.

---

I've been reading that over time, shafts stiffen.

quote:

---

the Pxi's are $40 each = $320
most places charge around $30 each club to reshaft = $240

$560

Pxi's are $30 upcharge through titleist and AP1s are $800= $1040

But if you order through discountdansgolf.com you can get a better price on it.

---

Thanks man, I'll look into it. I know my home course (Oakbourne) does re-shafting, but I'm sure they'll charge a ridiculously high amount. You wouldn't happen to know any good places in the Lafayette area would you?

Update: just found a set of dynalite gold xp s300 shafts and ordered them. Golf connection in Lafayette said they would do it for 15/club. All in all this project is going to coat about 200. Not bad!

I just went through this issue myself, and ended up getting new irons. I had AP2s with s300s and they're too heavy for me. If you can sell your old clubs on eBay, you'll probably come out about the same as if you reshafted your current irons. Plus, you won't have a set of AP1s that you've put $1200 + into. I ended up buying new irons for $700 with the shaft I need , and I expect to get about $350 or so for my AP2s. That'll put me right under the cost of buying new shafts, and I won't have a set of AP2s that I've put $1500 into.