Cypress cabinet cost

Hunter82378 could give you good information and possibly build them. He's bad arse!

I'll say it cause your dad was to much of a pussy to tell you but you are truly a useless frick. The man is trying to get information and the best you could do is be a little bitch.

Excel Millworks

225-664-4992

They are located in Denham Springs

$120 per linear foot for #2 cypress

$3.50 per sf is going rate for #2 cypress board. No idea on finished cabinet cost but would imagine $120 per LF is a good starting point.

Thanks. Going to call them tomorrow.

#2 at C&S and Service Lumber I believe is around $2.10 a board foot. We just have 1x8 mostly 12 and 16 foot long.

Looking at around $1.40 a linear foot.

Prices vary a lot....
The type of hardware meaning soft close hinges and drawer glides vs conventional. Amount of drawers vs doors.
Raised panels vs flat panels.
Trim and finish package.
There is a ton that goes into this and it all cost. Anyone in need can email me. I'll be done with my current customer on this Saturday.

The average cost per linear ft is around $1.30 to $2.00 depending on the quality and the your location as well. You should also consider the installation cost, contractors usually charge $40 to $50 per hour for the installation of the cabinets. The cabinets cost about 75% of the total cost so for a project with 30 linear ft. of cabinetry, in can cost around $25,000(LINK ). Do consider using a different material or a way to lessen the cost of the cabinets but if you have a budget then try to maximize your cabinet. Also ask for different quotations from different contractors to get the average cost.

According to everyone in the Les Miles home for sale thread last week, cypress cabinets are trashy and bring down the value of your home. So maybe you can buy the ones out of that house.