- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Propane burner problems
Posted on 4/11/10 at 6:49 pm
Posted on 4/11/10 at 6:49 pm
I have a new burner and I am having issues with it staying lit. Any ideas? It is a cast iron high pressure burner.
4
Posted on 4/11/10 at 7:24 pm to FriscoTiger
Where's Hank Hill when we need him?
Posted on 4/11/10 at 8:03 pm to FriscoTiger
Am not an expert.....but try blowing high pressure air through everything. There may be dirt, sand or a spider web blocking the burner.
Posted on 4/11/10 at 8:28 pm to AUDave
Try adjusting the air intake. I may not be getting enough air or to much air.
Posted on 4/11/10 at 8:37 pm to FriscoTiger
Have the valve to the burner closed before you open the valve on the tank. The pressure regulator won't work properly unless you do one step at a time.
Have the burner valve closed, open the tank regulator, then the valve to the burner.
If that doesn't work, tap the pressure regulator and see if you get more fuel. Replace if necessary.
Have the burner valve closed, open the tank regulator, then the valve to the burner.
If that doesn't work, tap the pressure regulator and see if you get more fuel. Replace if necessary.
Posted on 4/12/10 at 7:33 am to Enadious
you probably need to replace the regulator or as a previous poster mentioned adjust the air/fuel ratio...
Posted on 4/12/10 at 10:39 am to FriscoTiger
You ran out of propane
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News