Started By
Message

Looking to get a new driver.

Posted on 8/23/19 at 3:42 pm
Posted by Bourbonbowel87
Member since Jun 2019
114 posts
Posted on 8/23/19 at 3:42 pm
Where around Baton Rouge can I get fitted for a new driver. I know Edwin Watts and Golf Tech, but are there other places? Also drivers y’all think I should try out.
Posted by 8miles
slidell
Member since Oct 2005
5654 posts
Posted on 8/23/19 at 4:01 pm to
Ping G410. Club is money!
Posted by bnb9433
Member since Jan 2015
13781 posts
Posted on 8/23/19 at 4:36 pm to
Cobra F9
Posted by Front9Bandit
Member since Dec 2013
15432 posts
Posted on 8/23/19 at 5:19 pm to
No certain brand, they all go about the same distance when fit, pick one you like the feel of and look of at address and go. I tried all the new stuff and went back to a 2017 M1 440 because I like the look and feel and don’t hit any of the new stuff any further, 3-5 yards means nothing if I can’t hit the fairway or GIR.
This post was edited on 8/23/19 at 5:21 pm
Posted by htcthc321
Member since Oct 2010
1663 posts
Posted on 8/23/19 at 7:30 pm to
I just picked up a Callaway Rogue from their pre-owned site for $139.99 a couple weeks ago.

I love the club, but I think I'm more happy that I finally have the right shaft for my swing
Posted by Conner4real
Earth
Member since Sep 2017
455 posts
Posted on 8/24/19 at 2:58 am to
I went to Golftec for my driver fitting. It’s pretty well done over there. I brought my old driver for a baseline and left with a stick that cut my spin rate in half. My only complaint is that you pay the $100 for the fitting, but it’s only an hour and a half session. About an hour in, I was physically burnt and my swing was no longer a true representation. Also, it’s not enough time to truly test all available options. I wish they’d give you two 1 hour long sessions. You could compile more true data that way. But I bought a driver/shaft combo that is far superior for my swing than what I had so all in all it was worth it.
Posted by dpd901
South Louisiana
Member since Apr 2011
7531 posts
Posted on 8/24/19 at 8:39 am to
If you don’t mind an hour drive, go hit up Buddha Nguyen at Bebu Golf Studio in Gretna. I think he charges $150, but gives you $50 into the purchase price of the driver or shaft. He’s very thorough, and will frequency match the shaft for you as well for a small fee. I had a great experience there.
Posted by WildcatMike
Lexington, KY
Member since Dec 2005
41672 posts
Posted on 8/24/19 at 4:16 pm to
Callaway Preowned.

Just traded my Titleist 913 D2 for the Rouge 10.5.
Posted by rolltide32
Fort Payne, AL
Member since Nov 2013
6516 posts
Posted on 8/31/19 at 2:02 pm to
Haven't hit much in the current range of stuff. I briefly toyed with the Epic Flash Sub Zero but my Rogue was much better on mishits so the extra distance on pure shots wasn't worth it.

Haven't tried the 410 range. But 400 Max was great.

Haven't hit a Taylormade driver since the 17 M1/2s.

Assume you can't go wrong testing Ping 410, M6, and standard Epic Flash.

Also test the Titleist TS2. I thought the 917s were really good and supposedly TS blows them out of the water.

Mizuno has actually been a sleeper for drivers since the JPX 850 but I i haven't noticed much improvement over it since.

I test that new Honma driver Justin Rose plays at PGA Superstore earlier in the year. I was really impressed with it.
Posted by ATLsuTiger
Johns Creek
Member since Aug 2009
5422 posts
Posted on 8/31/19 at 4:15 pm to
Another option is to test a couple drivers through Global Golf U-try, play a few rounds of two ball to get a feel for which one you like best and then go to eBay to buy used.


Posted by FredsGotSlacks
Baton Rouge
Member since Mar 2008
815 posts
Posted on 9/1/19 at 11:18 am to
Taylor made M3 for me. I tested every major driver and the M3 had the lowest spin rates for me and my mishits don’t seem to scatter as much as they used to with my old driver.

The correct answer here though is you need to get fitted for your swing, everyone’s performance will differ depending on their swing/club/shaft combination and you need to figure out what works for you
Posted by mikedatyger
Orlandeaux, FL
Member since Jun 2005
4021 posts
Posted on 11/12/19 at 8:34 am to
"Get fitted to the right shaft is the most important."
I just finished a complete bag fitting and I can vouch for the process and GETTING THE RIGHT SHAFT.
Amazing difference from shaft to shaft with the same head. A professional fitting is worth every penny.

If you are interested, here is a vid of my fitting ...

DRIVER FITTING
Posted by nerdmachine
Baton Rouge
Member since Oct 2019
266 posts
Posted on 11/12/19 at 3:35 pm to
I picked up a ping G400 for around $200, nothing crazy shaft wise but I love the feel of the club and it goes a mile. Just bought it at Edwin Watts, was told that the 410 and 400 are basically the same club and that the only difference is aesthetics.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram