Started By
Message

Battery Switch Location - CC Boat

Posted on 8/2/17 at 3:18 pm
Posted by SavDawg8
Savannah, Ga
Member since Jan 2017
36 posts
Posted on 8/2/17 at 3:18 pm
So I'm installing a second battery and battery switch this weekend and was looking for some ideas on a good location to mount the switch. Both batteries are located in the center console so I originally wanted to mount it inside on the wall above the right battery, but I'm not sure if I like having the screws going through the side of the console...

Looking for a good setup that's relatively easy to get to that also looks decent.
Posted by Chris4x4gill2
North Alabama
Member since Nov 2008
3092 posts
Posted on 8/2/17 at 3:23 pm to
fiberglass a mounting board to the inside wall and then screw the switch to that.
Posted by ntrcptr
Baton Rouge
Member since Nov 2009
636 posts
Posted on 8/2/17 at 4:24 pm to
Which switch you using? Lots of them have a provision where you could just have the screwheads on the outside of the console with some finish washers.
Posted by cgrand
HAMMOND
Member since Oct 2009
38910 posts
Posted on 8/2/17 at 5:25 pm to
thru bolt it with the pan heads on the outside
you wont even notice they are there
Posted by SeaPickle
Thibodaux
Member since May 2011
3133 posts
Posted on 8/2/17 at 6:16 pm to
Does your CC not have a thick fiberglass "pad" around the inside of the console to allow you to screw in accessories? see the pad behind my vhf. this goes all the way around my CC.

If not, 5200 some starboard to the inside wall and screw into that
This post was edited on 8/2/17 at 6:20 pm
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram