- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Losing pressure in primer bulb mid WOT
Posted on 2/22/17 at 1:54 pm to highpockets
Posted on 2/22/17 at 1:54 pm to highpockets
So the problem I'm seeing is that the line from the tank to the motor goes up in the hull so I can't seemingly get to it without pulling the whole thing. Here's what I'm working with.
2
Posted on 2/22/17 at 2:02 pm to PapaPogey
They run one piece from the bulb to fuel filter. If you can twist the hose on the fitting its not tight enough.
There is defiantly an air leak between the tank and the carb.
Unless thats an old boat all the hose from GT is ethanol rated.
There is defiantly an air leak between the tank and the carb.
Unless thats an old boat all the hose from GT is ethanol rated.
This post was edited on 2/22/17 at 2:03 pm
Posted on 2/22/17 at 7:39 pm to PapaPogey
Like one poster said earlier, take your fuel line ( minus any connection ) and put it directly in your full fuel tank. Run WOT. If all is good then it is probably you tank connection. If the bulb goes soft then work towards the motor. Air is getting in somewhere and my guess it is one of the connections/clamps.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News