- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Gas Heater in a home..what has to be done to get it working
Posted on 11/22/16 at 3:10 pm to Weaver
Posted on 11/22/16 at 3:10 pm to Weaver
new units don't have pilot lights. I just went through the same thing this weekend.
follow these instructions:
1. go to main unit and see if gas valve is turned on; if yes, turn off. If no, leave off.
2. turn unit off.. should be a switch near the unit (usually black)
3. open side panel of unit and you will see a switch that says On and Off.. Turn the switch to On. (this is the gas switch/ignition. you will see the gas line going to the switch)
4. Put side panel back on
5. turn unit switch back on
6 turn gas valve to the on or "flow" position.
The unit is now ready to heat the house
follow these instructions:
1. go to main unit and see if gas valve is turned on; if yes, turn off. If no, leave off.
2. turn unit off.. should be a switch near the unit (usually black)
3. open side panel of unit and you will see a switch that says On and Off.. Turn the switch to On. (this is the gas switch/ignition. you will see the gas line going to the switch)
4. Put side panel back on
5. turn unit switch back on
6 turn gas valve to the on or "flow" position.
The unit is now ready to heat the house
0
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News