- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
4 prong dryer hook up question
Posted on 9/25/16 at 12:44 pm
Posted on 9/25/16 at 12:44 pm
Can I use a non copper screw to attach it? Where I have to connect the ground with other wire the copper screw is a little too short to screw tight
6
Posted on 9/25/16 at 12:59 pm to h2o4Madmartigan
why not just go get a longer copper screw?
Posted on 9/25/16 at 1:01 pm to h2o4Madmartigan
You don't have to use copper. Any metal screw will work, but will be more susceptible to rust and corrosion.
Posted on 9/25/16 at 1:01 pm to h2o4Madmartigan
yes...what is important is that the wire makes good contact with the connection point. Just be sure that the threads on the screw you use are exactly the same as the threads on the original screw so you don't screw up the female threads.
Posted on 9/25/16 at 1:12 pm to h2o4Madmartigan
The type of metal only matters when it's part of the actual conducting connection. If the screw is just being used to apply pressure to make the connection, then the metal does not matter.
Posted on 9/26/16 at 6:52 am to h2o4Madmartigan
Sounds like a treatment for a bad porno movie
Posted on 9/26/16 at 7:14 am to h2o4Madmartigan
too young.
could have used another season to grow.
could have used another season to grow.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News