DPMS AR-10 .308 Does anybody here have one? Are you happy with it?

I built one with a dpms style action. A gas gun is only going to be so accurate unless you go really high end. Factory guns will do well to stay under 1-1.5 moa in my experience. You might get lucky and get a tack driver but it will be just that, luck.

Really all depends upon what you call tight. Mine will hold .5 9 out of 10 times, but the 10th it will open up a bit. Just a lot of moving parts.

I have one but don't shoot it very much. no issues. put a 3-9 scope on it for hunting but only used xbow last year. it was accurate enough at a hundred yards for me, and that's a long shot for where I hunt.

I have the full JagerPro setup with the Panther DPMS AR-10 in 308 with the 3rd Gen night vision scope and all that.

I almost never shoot it on paper. Maybe twice a year I shoot it on paper at 50 yds 1.5" high to make sure it's still "on".

The way I hunt hogs is that we have bait stations and walk up to within 50-60 yards down wind of the corn pile. Then we set up with a tripod and cut loose on the pigs.

I'm more about volume than accuracy. But when the dust settles there usually a pile of dead hogs. And then a couple of days later there's usually a bunch of buzzards around. Our rule is that if they make it out of the food plot, we call it a "miss".

I'm not exactly a stickler for details.