re: Blueprints for Deer Stand

I built this one last year on my lease. I used 4x4x8' posts for the legs. The platform is 4'x 8' and the legs are angled out so they are approximately 5' x 10' at the ground level. Added a little cross bracing for support and then put the stand on top.

I built all of this out on the lease with pre-cut lumber and it worked great.

For the stand... I would pre fab some walls out of 2"x2" lumber and then slap a couple of pieces of tin on the top. Front of blind 7' tall and back of blind 6' tall for a lean-to type roof.

For siding I would recommend some 3/8" exterior sheathing or i've been wanting to try some vinyl siding. I think the vinyl siding would be easy to install on site and make it pretty light to move around if needed. You can also insulate the inside with 1/2" foam board.