- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Has anyone attempted to make a homemade Buck Boiler?
Posted on 12/2/15 at 10:04 am to bootlegger
Posted on 12/2/15 at 10:04 am to bootlegger
Bought a 20qt flat back feed bucket, a 1500w 120v heating element, and a 1" conduit port. I drilled a hole about an inch up from the bottom on the back, fed the element through the hole, and connected the port from the inside. This set up worked better than the Buck Boiler, but there were a few design flaws that can be overcome. It leaked sometimes around the seal so I am going to put Gorilla glue in the port and around the seal. For twenty bucks total it was well worth it. The head came out clean.
This post was edited on 12/7/15 at 8:42 am
Popular
Back to top
Follow TigerDroppings for LSU Football News