- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Running Wire Help...Pic inside
Posted on 11/18/15 at 8:46 pm
Posted on 11/18/15 at 8:46 pm
I am trying to mount this PS4 on the left wall and run the wire to the back of the TV. How do I go about running the wire around the corner and to the back of the TV? Also, if I am able to find a tool or way to cut holes through the 2x4s what is the best way to pull the wire through?
Posted on 11/18/15 at 8:49 pm to GeauxTime9
Flexbit and glow rod
This post was edited on 11/18/15 at 8:50 pm
Posted on 11/18/15 at 9:37 pm to GeauxTime9
I mounted my tv just like you have yours. I ran the cabling through the studs after I drilled them out with a hole saw back to the wall you wish to mount tbe PS4.
I had to get in my attic and repel down the chimney area to run the wires.
I had to get in my attic and repel down the chimney area to run the wires.
Posted on 11/18/15 at 10:16 pm to GeauxTime9
Ventless gas, vented gas, full stack chimney, or duct stack chimney? That will help determine how you can run the wires.
Posted on 11/18/15 at 10:55 pm to GeauxTime9
gonna have to go into the wall, straight up, then straight back down behind the TV.
Posted on 11/19/15 at 7:37 am to GeauxTime9
First off, get you a media box.
Put it on your side wall and run some power to it. Then run your data cable up through the wall, into the attic and back down to the tv, where you should have another media box.
Put it on your side wall and run some power to it. Then run your data cable up through the wall, into the attic and back down to the tv, where you should have another media box.
Posted on 11/19/15 at 8:04 am to GeauxTime9
Why not mount the PS$ where it is? Or raise it up a litter higher and mount? Does it affect the controllers from accessing the PS4? I am asking out of ignorance not being funny.
Knowing the type of fire place you have will be helpful.
Knowing the type of fire place you have will be helpful.
Posted on 11/19/15 at 8:09 am to GeauxTime9
Just be prepared to drill through the header twice (up and down) and possibly fire block in the middle.
You can rent the flex bit if you need one.
I went with wireless HDMI instead of doing all of that but I have a cabinet off to the side. With your console being by itself it might not be as easy.
You can rent the flex bit if you need one.
I went with wireless HDMI instead of doing all of that but I have a cabinet off to the side. With your console being by itself it might not be as easy.
Popular
Back to top
Follow TigerDroppings for LSU Football News