Started By
Message

OB Mechanics..AC problems on gmc sierra

Posted on 7/26/15 at 12:57 pm
Posted by Flanders
Bham
Member since May 2008
9848 posts
Posted on 7/26/15 at 12:57 pm
I have a 2006 gmc sierra that the passenger blows hot air while the drivers side continues blowing cold. I just replaced the blend door actuator under the glove box and the problem continues.. what's the deal? This Louisiana heat is killing me! Please help.
Posted by Clames
Member since Oct 2010
16729 posts
Posted on 7/26/15 at 1:12 pm to
Common problem with several possible causes. It is intermittent when doing this?
Posted by Hammertime
Will trade dowsing rod for titties
Member since Jan 2012
43030 posts
Posted on 7/26/15 at 1:18 pm to
There are two actuators. The one on my old 05 Tahoe was way up in the dash. Had to take the airbag out and everything. That had a center console in it

They are also very picky about how you put them in. Did you match it up perfectly with the old one? Did you run through the cycles of hot and cold a bunch of times? Also, I have heard stories of a bunch of them being bad out of the box.

Can you hear it switching?
Posted by Yewkindewit
Near Birmingham, Alabama
Member since Apr 2012
20161 posts
Posted on 7/26/15 at 4:26 pm to
HAMMERTIME NAILS IT. I just fixed my 04 Yukon with the driver side blend door actuator. takes about 20 mins to replace. YouTube is your friend. My A/C would be doing just fine, I heard clicking, then hot air on the drivers side and continued cold on the passenger side would ensue. Sounds like your issue as well.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram