- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: 357 H&H gun pron. (update in OP scope added)
Posted on 1/28/15 at 7:46 pm to DownSouthDave
Posted on 1/28/15 at 7:46 pm to DownSouthDave
Perfect choice of glass
I approve. That's a badass rig. If the bolt is barely touching the scope you could get rings a few mils taller and you wouldn't notice the difference.
ETA: not sure about other brands of rings, but I think leupold rings are about 0.010" difference in heights. The height is on the box. You could get angry with a micrometer and figure out exactly what you need if you were ambitious enough.
I approve. That's a badass rig. If the bolt is barely touching the scope you could get rings a few mils taller and you wouldn't notice the difference.
ETA: not sure about other brands of rings, but I think leupold rings are about 0.010" difference in heights. The height is on the box. You could get angry with a micrometer and figure out exactly what you need if you were ambitious enough.
This post was edited on 1/28/15 at 7:48 pm
Posted on 1/28/15 at 7:54 pm to DownshiftAndFloorIt
Thanks. I can't wait to shoot something with it.
It's just barely rubbing. It still passes, just gets caught up a little. Regardless, it's unacceptable. I want to stick with the Alaskan Arms rings, they are badass. I really like the cam lock design. They only make one other size. I may email them and get the size difference. With those QD to rings, I'm already off of the bore quite a bit. I could probably take a dremel to the bolt and shave it just a hair. That would probably do the trick. Try to blend it in and refinish it, nobody would ever know.
It's just barely rubbing. It still passes, just gets caught up a little. Regardless, it's unacceptable. I want to stick with the Alaskan Arms rings, they are badass. I really like the cam lock design. They only make one other size. I may email them and get the size difference. With those QD to rings, I'm already off of the bore quite a bit. I could probably take a dremel to the bolt and shave it just a hair. That would probably do the trick. Try to blend it in and refinish it, nobody would ever know.
Popular
Back to top
Follow TigerDroppings for LSU Football News