Why so mad?

It is a durable INEXPENSIVE gun. Wingmaster was the shite.

Can you explain how your's jammed? Those words are never words that Ive ever used in the same sentence as mine. And I don't clean mine often. a spray of oil here and there and a wipe of the outside IMMEDIATELY upon returning.

quote:
I want to teach him to take care of his stuff.

So you leave it sitting around wet for an extended period of time. Seems the lesson he learned is how hard it is to fix something you procrastinated on in the first place.

For rust to occur you need 3 things, metal, air, and moisture. If you wiped the moisture off, there could be no rust.

You "may" have a defective situation...contact the manufacturer.

This post was edited on 1/7/15 at 1:56 pm

1 ...

Report Post

Posted by ducksnbass

Member since Apr 2014

754 posts

Posted on 1/7/15 at 2:43 pm to GeeOH

quote:
Can you explain how your's jammed?

Yes, shoddy workmanship. Wouldn't allow the new shell to slide smoothly into the chamber. Too many sharp, unfinished edges. Then, the fired shell would stick in the chamber. Had to disassemble the gun in the field several times to remove the shell.

quote:
So you leave it sitting around wet for an extended period of time. Seems the lesson he learned is how hard it is to fix something you procrastinated on in the first place.

Thanks, your sarcastic insight is insightful.

I already said I didn't have time to get to it right away. I usually clean things up "If needed" right away. I'm glad yours is the epitome of reliability and workmanship. Congratulations!

4 ...

Report Post

Outdoor Board - Replies to Post

Return To Board

Page 1

Return To Board