- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Official WINK HUB Home Automation thread
Posted on 3/1/16 at 2:22 pm to CAD703X
Posted on 3/1/16 at 2:22 pm to CAD703X
quote:
BLACK once thats done, insert the TOP black into the black hole. turning the screw will tighten them into the hole. don't make the mistake of trying to wrap the thick gauge wire around the screw. unecessary because the leviton has that cool feature that turning the screw tightens down the holes.
Whoa...something doesn't make sense here. Why would he be putting the two blacks to the load side? This is most likely power, so it should go to black
Posted on 3/1/16 at 2:29 pm to mctiger1985
quote:
Whoa...something doesn't make sense here. Why would he be putting the two blacks to the load side? This is most likely power, so it should go to black
all the wire are black. did i get that reversed? should the 2 wires (at the bottom..they're the load right?) in the first pic at the bottom go to the black holes in the leviton and not the red?
and the one at the top in the first pic goes to..red (line?)
i just do it both ways when wires are the same color and if it doesnt work one way i try the other.
This post was edited on 3/1/16 at 2:38 pm
Popular
Back to top
Follow TigerDroppings for LSU Football News