- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: I come to my OB brethren in seek of wise guidance (AR15 BUILD)
Posted on 1/28/14 at 2:49 pm to DirtyMikeandtheBoys
Posted on 1/28/14 at 2:49 pm to DirtyMikeandtheBoys
quote:
grind the pins a little and then drive them out
1
Posted on 1/28/14 at 3:09 pm to Tbooux
The barrel nut will be the toughest to remove.
Torque the new nut to 30-80lbs. Make sure you use non graphite anti seize on the barrel nut threads.
If you don't have a vise, torque wrench, or a vise block just take it to someone who does.
Eta: try barking irons for a faster turn around.
A lot a folks just cut the fsb and leave them on....
LINK
LINK
Torque the new nut to 30-80lbs. Make sure you use non graphite anti seize on the barrel nut threads.
If you don't have a vise, torque wrench, or a vise block just take it to someone who does.
Eta: try barking irons for a faster turn around.
A lot a folks just cut the fsb and leave them on....
LINK
LINK
This post was edited on 1/28/14 at 3:31 pm
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News