Started By
Message
locked post

Thinking about buying a used 16' aluminum boat.

Posted on 2/18/13 at 4:41 pm
Posted by sloopy
Member since Aug 2009
6908 posts
Posted on 2/18/13 at 4:41 pm
I don't know how old it is, but do know it is made from commercial aluminum or it is a commercially rated aluminum boat. I am going to try and drive to take a look at it in the next couple of weeks. What should I look for?

Also has a 40 evinrude on the back that looks like it is from the 80's, not sure if it runs yet. Will try and upload a picture later.
Posted by LSUballs
RayVegas LA
Member since Feb 2008
40383 posts
Posted on 2/18/13 at 4:42 pm to
A 40 HP ought to push it pretty good. So obviously when you drive it hang on Sloopy, Sloopy hang on.
Posted by sloopy
Member since Aug 2009
6908 posts
Posted on 2/18/13 at 4:45 pm to
HA, not sure if it runs though. It might need some TLC.
Posted by jimbeam
University of LSU
Member since Oct 2011
75703 posts
Posted on 2/18/13 at 4:46 pm to
16' flat with a 40 Yamaha and it flies 20 years old and runs like a champ
Posted by redfish99
B.R.
Member since Aug 2007
19536 posts
Posted on 2/18/13 at 5:21 pm to
Hopefully it's an allwelded boat,no joints and rivets. Check the transom real good for cracks or bending. If it has decks check for wood rot. I fished out of an old 17' express for 20 years in the bayous, if its in decent shape it should do you right.
Posted by sloopy
Member since Aug 2009
6908 posts
Posted on 2/18/13 at 5:47 pm to
It is an alwelded boat if I remember correctly. It was my Paw Paws old boat he sold to someone and I might buy it back. Here is a pic.
Posted by fishfighter
RIP
Member since Apr 2008
40026 posts
Posted on 2/18/13 at 5:51 pm to
Check the area around were any batterys are. Check under them.
Posted by El Josey Wales
Greater Geismar
Member since Nov 2007
22710 posts
Posted on 2/18/13 at 5:51 pm to
quote:

hang on Sloopy, Sloopy hang on.


Posted by Geauxtiga
No man's land
Member since Jan 2008
34401 posts
Posted on 2/18/13 at 5:53 pm to
Sounds like one I saw on La Sportman and I was very tempted. Did it look like the wood on the floor needed to be replaced? If so it looks worth the trip to at least see it.


EDIT: Just saw the pic. Like the girl says when you're young and trying to stick it in, "That's not it."
This post was edited on 2/18/13 at 5:55 pm
Posted by sloopy
Member since Aug 2009
6908 posts
Posted on 2/18/13 at 5:56 pm to
I think the floor and decks may be fiberglassed. I'm more worried about the motor being a POS. If I did pull the trigger on it, I would need a trailer as the axle is broken on the original trailer. Boat and motor are cheap.
Posted by JAB528
The Mexican Ocean
Member since Jun 2012
16870 posts
Posted on 2/18/13 at 5:57 pm to
Why not just get a new axle?
Posted by sloopy
Member since Aug 2009
6908 posts
Posted on 2/18/13 at 5:58 pm to
was thinking about that, I have to see if the owner wants the trailer or not.
Posted by sloopy
Member since Aug 2009
6908 posts
Posted on 2/18/13 at 5:59 pm to
Apparently they have been using the boat to store shite on top off it.
Posted by fishfighter
RIP
Member since Apr 2008
40026 posts
Posted on 2/18/13 at 5:59 pm to
quote:

axle is broken on the original trailer. Boat and motor are cheap.


New axle, bearing, hubs, springs, cost around $200.
Posted by Geauxtiga
No man's land
Member since Jan 2008
34401 posts
Posted on 2/18/13 at 6:02 pm to
quote:

Apparently they have been using the boat to store shite on top off it.


Don't we all.
Posted by sloopy
Member since Aug 2009
6908 posts
Posted on 2/18/13 at 6:03 pm to
true.

Here is another picture
This post was edited on 2/18/13 at 6:06 pm
Posted by QuietTiger
New Orleans
Member since Dec 2003
26256 posts
Posted on 2/18/13 at 6:09 pm to
quote:

sloopy

How tall are you people? That seat looks 4+ feet high and it as at it's lowest.
Posted by lsufan112001
sportsmans paradise
Member since Oct 2006
11217 posts
Posted on 2/18/13 at 6:11 pm to
that front pedestal is at full erection. you can name this boat "the Erector" when you get it, there, it's settled....
Posted by Geauxtiga
No man's land
Member since Jan 2008
34401 posts
Posted on 2/18/13 at 6:12 pm to
Man I love the hull.

Is that Grand Chenier?
Posted by sloopy
Member since Aug 2009
6908 posts
Posted on 2/18/13 at 6:19 pm to
I like the haul and the 2 platforms on it as well. No it is not grand chenier. I know I would eventually have to re-power, just has sentimental value as it was our family boat, not to mention it would tear reds up in the marsh and thats all I want to do.
first pageprev pagePage 1 of 2Next pagelast page

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on X, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookXInstagram