- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Aluminum Boat Repair...........
Posted on 12/13/12 at 3:04 pm to TJG210
Posted on 12/13/12 at 3:04 pm to TJG210
Drill it, put bolt with washers on both sides of transom, coat with 5200, tighten nut, let it cure for 24 and you're done.
You can weld a patch, but if the welder gets the metal too hot, your problems will expand. A guys hit on of our pontoons with the mudboat prop and I fixed it like above with a 3"x3" drilled patch. This was the season after Katrina, its still holding.
You can weld a patch, but if the welder gets the metal too hot, your problems will expand. A guys hit on of our pontoons with the mudboat prop and I fixed it like above with a 3"x3" drilled patch. This was the season after Katrina, its still holding.
0
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News