- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Offset smoker mods - need help
Posted on 11/28/12 at 11:30 pm to AlxTgr
Posted on 11/28/12 at 11:30 pm to AlxTgr
Mine is about 1/2 the length of the cook chamber, but I would suggest laying it in without the weld and seeing how consistent your temp stays across the chamber, then you can shorten, if necessary, before making the weld...
1
Posted on 11/29/12 at 7:29 am to GeauxldMember
Wow, I was going to run it almost to the far end. Like leaving just a
few inches of a gap forcing the smoke all the way across then back again.
on the tubes, they would be at least 2" square. If they clog that bad, which I really cannot see, the box and tubed can be removed for cleaning.
few inches of a gap forcing the smoke all the way across then back again.
on the tubes, they would be at least 2" square. If they clog that bad, which I really cannot see, the box and tubed can be removed for cleaning.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News