- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: ATV Help - Honda Backign Plate stuck
Posted on 9/25/12 at 7:25 am to Chris4x4gill2
Posted on 9/25/12 at 7:25 am to Chris4x4gill2
Just remember aluminum expands faster than steel. Gonna be a pita no matter how you do it. I guess id try heating the inner race first. Be ready for grease fire. Be carefull not to cut the shaft.
1
Posted on 9/25/12 at 7:30 am to DownshiftAndFloorIt
Its already a PITA.
I dont think there is any grease left in it - plenty of ATF/Acetone/liquid wrench though.
Im not worried abotu the expansion of the aluminum - I need that bearing to expand faster than the axle. Once I get it off the axle, I can get it out of the backing plate - the C clip is on the rear of the plate. Once off the axle, I can get to the clip to remove the bearings.
I dont think there is any grease left in it - plenty of ATF/Acetone/liquid wrench though.
Im not worried abotu the expansion of the aluminum - I need that bearing to expand faster than the axle. Once I get it off the axle, I can get it out of the backing plate - the C clip is on the rear of the plate. Once off the axle, I can get to the clip to remove the bearings.
Page 1 of 1
Back to top
Follow TigerDroppings for LSU Football News