re: Built my own Cowboy/County/Coonass Cooler...

quote:

---

Did you redo the drain to a bottom drain on the new one or is it on the other side? Where did the ironwork come from? The rustic handles add a nice touch.

---

For the drain I screwed on a 3/4" pvc threaded coupler, then a 1.5" piece of pvc pipe, then another 3/4" threaded coupler then just a regular 3/4 water hose faucet. Drains just fine. You can see where the spout comes out on one of the pics on page 1.

The ironwork was just some crap I picked up at Hobby Lobby or Kirklands I think. I believe it was like $10-15. I had to trim it down some. It was orginally about 6" too wide on each side and about 3" too tall. The handles are actually door knockers from a store my girlfriend works at. Not their orginal purpose but they'll work all the same.